K20/K24 Kal

K-Series Programmable ECU Calibration updates / downloads
Post Reply
itsmemike
Posts: 1
Joined: Tue Mar 16, 2021 8:50 pm

K20/K24 Kal

Post by itsmemike »

New here, wondering what calibration I should use when first firing up my motor.

K20 ITR head 3 angle valve job, stock otherwise.
K24 bottom end with arias 10:3:1 pistons, eagle rods and grinded crankshaft 10/10.

Gonna run it without the turbo kit for now until I get the charge piping and odds/ends tied up.

Thanks in advance for any and all help/input.
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: K20/K24 Kal

Post by CalibratEd »

i suggest running a stock K20 tune and dialing it in. I can help if you can provide datalogs with wideband input.

-Ed
Post Reply