K24 Supertech 12.5:1 Toda Cams

K-Series Programmable ECU Calibration updates / downloads
Post Reply
dannybunny
Posts: 5
Joined: Wed Nov 11, 2020 1:06 am

K24 Supertech 12.5:1 Toda Cams

Post by dannybunny »

Hi guys I got K24 with 12.5:1 Supertech pistons and Toda cam C and I'm trying to run in my engine, I tried all the base maps they all make heaps knocks, some MAP I can heaps the engine pings, but some it don't but it still pick up knocks, how can I determine real or fake knocks?

I set the VTC to 10degree and ignition timing cant be more than 20 degree BTDC if I set anything before 20 it start pick up knocks, I post my MAP and datalog can someone help me to see what's wrong please? I just want to safely break in the engine and then get the tuner dyno it, but if the compression too high I may change head gasket before I get someone to tune it. Thank you guys
dannybunny
Posts: 5
Joined: Wed Nov 11, 2020 1:06 am

Re: K24 Supertech 12.5:1 Toda Cams

Post by dannybunny »

Knocking.kdl
(3.3 MiB) Downloaded 125 times
Attachments
K24 ignition timing.kal
(168.24 KiB) Downloaded 155 times
Post Reply