P1162 error code hondata krpo V3 Aem wideband 30-0300

K-Series Programmable ECU Calibration updates / downloads
Post Reply
K20sleeper
Posts: 1
Joined: Sun Oct 04, 2020 8:14 am

P1162 error code hondata krpo V3 Aem wideband 30-0300

Post by K20sleeper »

Hi im having a problem with my k20a dc5. My ecu is prb hondata k pro v3 serial number 12612. I using a aem wideband 30-0300.. A error keeps popping p1162 air and fuel ratio slow response.. I did check all the wires everything is installed properly..
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: P1162 error code hondata krpo V3 Aem wideband 30-0300

Post by Spunkster »

This could be a problem with the wideband sensor itself.
the_jaykobe
Posts: 5
Joined: Mon Sep 21, 2020 5:11 am

Re: P1162 error code hondata krpo V3 Aem wideband 30-0300

Post by the_jaykobe »

I'm using a v3 Kpro prb, with a 0300 aem Wideband. I have zero issues, and it's functioning perfectly fine. Did you hook up both posi/neg wires into the analog input on the Kpro?
Post Reply