In need of a basemap to get things started with my turbo charged k24a8 swapped del sol. Currently have no vss input so VTEC will run off rpm. Any tips on set up and tuning appreciated. I can provide datalogs as needed once running.
Specs
All stock K24a8 5speed out of 2007 accord
Ebay turbo charger
Sidewinder turbo manifold
Full 3 inch down pipe and exhaust
Custom made centerfeed long tube runner intake Manifold
Hondata 4bar map sensor
Grams 750cc injectors
Fuel pressure at 50 psi with aem fpr
K24a8 turbo swap
- CalibratEd
- Posts: 1468
- Joined: Fri Feb 07, 2020 3:20 pm
- Contact:
Re: K24a8 turbo swap
I would start by using a stock calibration. Modifying the injectors size and map sensor. Get it running. Post the datalog with wideband data and the tune. I can then help you in the tuning process.
-Ed
-Ed
Instagram: calibrated.tuning
-
- Posts: 3
- Joined: Fri Aug 14, 2020 4:56 am
Re: K24a8 turbo swap
Ok, I’ve got a good basemap started and started dialing in the fuel tables. I will post datalog tomoro. ThanksCalibratEd wrote: ↑Sun Aug 16, 2020 6:45 pm I would start by using a stock calibration. Modifying the injectors size and map sensor. Get it running. Post the datalog with wideband data and the tune. I can then help you in the tuning process.
-Ed
- CalibratEd
- Posts: 1468
- Joined: Fri Feb 07, 2020 3:20 pm
- Contact:
Re: K24a8 turbo swap
Ok sounds great.Kylerthecreator wrote: ↑Mon Aug 17, 2020 8:52 pm
Ok, I’ve got a good basemap started and started dialing in the fuel tables. I will post datalog tomoro. Thanks
-Ed
Instagram: calibrated.tuning
-
- Posts: 2
- Joined: Tue Sep 08, 2020 1:07 pm
Re: K24a8 turbo swap
Any update on your set up? I plan on going this route one day.
-
- Posts: 2
- Joined: Tue Sep 08, 2020 1:07 pm
Re: K24a8 turbo swap
If you dont mind me asking what ecu and wire harness did you go with?