k20a3 map and driving log

K-Series Programmable ECU Calibration updates / downloads
Post Reply
oksdesigns
Posts: 18
Joined: Sat Apr 20, 2013 9:48 pm

k20a3 map and driving log

Post by oksdesigns »

I made the map and wanted to know if im going in the correct direction with my fuel and ignition tables.
Attachments
k20a3 rev4.0.kdl
(8.66 MiB) Downloaded 178 times
k20a3 rev4.kal
(147.63 KiB) Downloaded 183 times
User avatar
CalibratEd
Posts: 1420
Joined: Fri Feb 07, 2020 3:20 pm

Re: k20a3 map and driving log

Post by CalibratEd »

What wideband are you using and how do you have it configured. I cant seem to see it on the datalog.
oksdesigns
Posts: 18
Joined: Sat Apr 20, 2013 9:48 pm

Re: k20a3 map and driving log

Post by oksdesigns »

aem uego on eld
tekcajwolley
Posts: 9
Joined: Fri Dec 13, 2019 2:38 pm

Re: k20a3 map and driving log

Post by tekcajwolley »

What is the arrangement you are working with?
ie: intake, exhaust, etc.
Williams802
Posts: 2
Joined: Wed Apr 07, 2021 5:22 pm

Re: k20a3 map and driving log

Post by Williams802 »

I have a k20A base with Megan header and a hks catback exhaust and a short ram injen intake with a a2 intake manifold and I can’t find a tune to run my car right at all it runs under type s but like shit and won’t start at all under base... any help?
User avatar
CalibratEd
Posts: 1420
Joined: Fri Feb 07, 2020 3:20 pm

Re: k20a3 map and driving log

Post by CalibratEd »

Williams802 wrote: Sun Apr 11, 2021 5:27 pm I have a k20A base with Megan header and a hks catback exhaust and a short ram injen intake with a a2 intake manifold and I can’t find a tune to run my car right at all it runs under type s but like shit and won’t start at all under base... any help?
Start your own thread. The files are a base so they will need work. I can help dial in the tune if you can provide me with datalogs with wideband data.

-Ed
Williams802
Posts: 2
Joined: Wed Apr 07, 2021 5:22 pm

Re: k20a3 map and driving log

Post by Williams802 »

Hey ed i am not running a wideband its all stock, other then the parts i listed. I got it to run under base (new to kpro had to turn immobilizer off) but still runs like crap will run for like 10 mins then it just shuts off. i have to recalibrate the tune before it will fire again then it will do the same
User avatar
CalibratEd
Posts: 1420
Joined: Fri Feb 07, 2020 3:20 pm

Re: k20a3 map and driving log

Post by CalibratEd »

Williams802 wrote: Sat May 29, 2021 7:19 am Hey ed i am not running a wideband its all stock, other then the parts i listed. I got it to run under base (new to kpro had to turn immobilizer off) but still runs like crap will run for like 10 mins then it just shuts off. i have to recalibrate the tune before it will fire again then it will do the same
Sounds good. Are you running an oem wideband?

-Ed
Post Reply