Page 1 of 1

EP3 K20A2 fuel pressure

Posted: Tue Mar 12, 2019 6:22 am
by WillP
Hi,

Can KManager show fuel pressure data at all? I cannot see it if it does.

Also how is the stock fuel pressure regulated? Is it worth setting up a fuel pressure regulator just before the rail feed with or without a return line?

I am looking into this for an ITB conversion.

Thanks :)

Re: EP3 K20A2 fuel pressure

Posted: Tue Mar 12, 2019 9:22 am
by Spunkster
There is not fuel pressure sensor from the factory. If you have a version 4 K-Pro you can use an analog pressure sensor to one of the analog inputs on the K-Pro board.