Calibration for KA23 block with ka24 head with kpro ecu.

K-Series Programmable ECU Calibration updates / downloads
Post Reply
nicky365bry
Posts: 2
Joined: Wed Feb 21, 2018 5:47 pm

Calibration for KA23 block with ka24 head with kpro ecu.

Post by nicky365bry »

I have a 03 acura rsx type s . it has a ka23 block with ka24 head with a kpro ecu. Cold air intake . skunk 2 alpha series header and exaughst no cateletic converter. Stock 310 inj. The idle dips when ever I srop and push the clutch in. Then comes back. I dont know a lot about tuning just what i could look up . i have it on stick ka24 with cold air intake dyno tuned. Is that right ? Needs some help.
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Calibration for KA23 block with ka24 head with kpro ecu.

Post by Spunkster »

It sounds like this needs to be properly tuned on the dyno.
Post Reply