HELP!!! I need a calibration for my 2002 Base K20a3 w/ PRB KPRO ECU

K-Series Programmable ECU Calibration updates / downloads
XDarkPrinceX
Posts: 12
Joined: Sun Jan 13, 2019 1:15 am

Re: HELP!!! I need a calibration for my 2002 Base K20a3 w/ PRB KPRO ECU

Post by XDarkPrinceX »

Been tuning out the fuel maps manually and going kinda slow using normal driving datalogs, really getting the partial throttle tuning down more then anything as WOT is pretty spot on, however I wanted to use autotune for the partial throttle to get it even closer (within .05 - .1 A/F : Command A/F) but I can't seem to get autotune to start, I selected the tables for it to auto tune 0/10/20 degrees on low speed and the live button only stays yellow on those tables.
1. selected tables
2. uploaded calibration
3. started engine
4. started data
5. autotune is greyed out???
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: HELP!!! I need a calibration for my 2002 Base K20a3 w/ PRB KPRO ECU

Post by Spunkster »

It only autotunes while CTRL-T is held down and you must be datalogging with the calibration open when doing this.
XDarkPrinceX
Posts: 12
Joined: Sun Jan 13, 2019 1:15 am

Re: HELP!!! I need a calibration for my 2002 Base K20a3 w/ PRB KPRO ECU

Post by XDarkPrinceX »

Well that's unfortunate, so if I select my 3 tables to tune, upload to ECU, start car, start datalogging I could have someone hold CTRL+T even though its greyed out on the toolbar?
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: HELP!!! I need a calibration for my 2002 Base K20a3 w/ PRB KPRO ECU

Post by Spunkster »

Autotune will only work with PRB based calibrations.
Post Reply