Stalls out past half throttle

K-Series Programmable ECU Calibration updates / downloads
Post Reply
redyute
Posts: 34
Joined: Sun Feb 08, 2015 4:33 pm

Stalls out past half throttle

Post by redyute »

99 civic 4 door with a3 swap running kpro 4, using prb cal coppied the tables off of base kal. At idle i can rev to redline, but soon as i start driving the engine stalls out or more like boggs down soon as i go past around half throttle, almost like she stalls out completely if i hold the throttle past that point, but soon as i release she is fine.So i thought i had a bad tps but i have addjusted it so i have .5v closed and i get 4.4v wide open, ive run out of ideas at this point so here i am open to try out any ideas you guys may have, she drives fine if i dont go past half throttle lol.
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Stalls out past half throttle

Post by Spunkster »

You need to post the calibration as well as a datalog showing the problem.
Post Reply