what do i need to do to get the inj (ms) to drop down??

K-Series Programmable ECU Calibration updates / downloads
Post Reply
boosted crx-r
Posts: 53
Joined: Sat Aug 26, 2006 9:27 pm

what do i need to do to get the inj (ms) to drop down??

Post by boosted crx-r »

ok so im trying to finish up but spotted this problem. what do i need to do or change to make the Inj (ms) in this datalog come down or is it fine how it is. the display is showing a red color so im assuming it is to much. if there is any other problem you see dont hesitate to let me know. thanks -mike
Attachments
inj (ms).kdl
(186.38 KiB) Downloaded 73 times
stupi rsx.kal
(167.19 KiB) Downloaded 63 times
shut up and boost it!

User avatar
Spunkster
Site Admin
Posts: 18381
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: what do i need to do to get the inj (ms) to drop down??

Post by Spunkster »

Don't worry about the MS, look instead at the duty cycle. If it gets up to 85% you may want to think about getting larger injectors.

boosted crx-r
Posts: 53
Joined: Sat Aug 26, 2006 9:27 pm

Re: what do i need to do to get the inj (ms) to drop down??

Post by boosted crx-r »

awesome thanks...
shut up and boost it!

Post Reply