Endurance K20a2

[J0aquin]

Hi people, im back with another real big problema, this are som features about my car

Is an k20a2 swap placed in a EG6

This are 2 small datalogs i did some minutes ago, im checking right now in the Knock count, and also checking up about the new tables, why is my knock count so high??? is my knock sensor working ok?? is my kal that bad?? i hope someone can help me. thx

Hola foreros, estoy de vuelta despues de un tiempo un poco de problemas bastante grandes
Subo 2 pequeños logs de 5 y 4 minutos que hice hace un momento, estoy revisando el sensor de predetonacion que es el que me esta dando problemas, ya que me marca muchisimos, por que me esta marcando tantos?? mi sensor de predetonacion estara fallando?? es el 2do que pongo, en realidad mi kal esta tan mal realizada?? por el momento ando aprendiendo acerca de la nuevas tablas de predetonacion, ojala alguien peuda ayudarme. Gracias

[Spunkster]

Has this been tuned on the dyno?

[J0aquin]

no, not yet, im afraid to the car to explote, it has to many knocks, but im not really sure, what should i do, do i start with a "New Calibration" from the default that the kmanager has?? or should i continue with this one?

[Spunkster]

I would discuss this with your tuner. He may find it easier to start from a new calibration.

[J0aquin]

the thing here is that im actually being my own tuner, this was a kal that was working in another car, but i always had the same problem, what new kal should be the best for me to start??? can someone help me out?? maybe with a little guide or something about it. Thx

[rikitaun]

Joaquin, sin mirar el log y por lo que me has comentado por mail, seguramente sean "falsos" knocks por llevar levas mas agresivas.

[J0aquin]

this is the last kal i installed i work in part throttle, just place the car in a "safe mode" this is the log it shows, what do u think?

esta es la ultima kal que le puse trabajando en la calle, estoy buscando ponerlo en un modo seguro para que no existan knocks, este es el log que me dio, que opinan??

[J0aquin]

I just Changed the kal, this is the log and the kal i used