k20a2 I/H/E/RBC with IMG CC stage 4 clutch and flywheel

K-Series Programmable ECU Calibration updates / downloads
keto06
Posts: 499
Joined: Fri Jul 17, 2009 9:29 pm

Post by keto06 »

Do you want me to fix the kalibration for you?

Did you feel any difference from your kal?

96integra
Posts: 55
Joined: Thu Feb 18, 2010 9:52 am
Location: madison,wi

Post by 96integra »

it feels alot better i want you to fix it so it would be better and safer since i dont know whats going on kinda newby to the k-pro if you can help that would be great..

96integra
Posts: 55
Joined: Thu Feb 18, 2010 9:52 am
Location: madison,wi

Post by 96integra »

the johnnymap you had made my power band alot better..and feels nicer and smoother...i was logging my old one and it was running super lean..

keto06
Posts: 499
Joined: Fri Jul 17, 2009 9:29 pm

Post by keto06 »

96integra wrote:the johnnymap you had made my power band alot better..and feels nicer and smoother...i was logging my old one and it was running super lean..
Mwahahahah I WIN! Now if only I had a dyno....

96integra
Posts: 55
Joined: Thu Feb 18, 2010 9:52 am
Location: madison,wi

Post by 96integra »

so are you gonna fix it for me or just laugh lol....anyway i need help look at my logs and please help me since you made this KAL..

keto06
Posts: 499
Joined: Fri Jul 17, 2009 9:29 pm

Post by keto06 »

i will fix it as long as

A) You dont spam the boards anymore

B) You dont ever post your old map anywhere
Attachments
96TegMap1.kal
(49.21 KiB) Downloaded 337 times

96integra
Posts: 55
Joined: Thu Feb 18, 2010 9:52 am
Location: madison,wi

Post by 96integra »

will do thanks so is this the new map? should i log it again and send it back?

96integra
Posts: 55
Joined: Thu Feb 18, 2010 9:52 am
Location: madison,wi

Post by 96integra »

also should i do the pulls on open loop? also what did you change on this map compare to the johnnymap and how did my logs look good or bad?

keto06
Posts: 499
Joined: Fri Jul 17, 2009 9:29 pm

Post by keto06 »

Yes log again and send back. Open loop ALWAYS.

Get some good daily driving in there too. Highway cruising plus down a busy street with a bunch of stoplights or something so you get some idle and acceleration time as well. Gotta get you TUNED UP!

Changes were mainly just to fuel values. Your first pull looked good just a tad rich. Though I cant imagine it didnt feel night and day compared to your old map.

96integra
Posts: 55
Joined: Thu Feb 18, 2010 9:52 am
Location: madison,wi

Post by 96integra »

ok thanks so much....i will try and get some log in ASAP kinda busy work week but will get some in by this week...or do you want it right away cause its snowing a little here and wet..

keto06
Posts: 499
Joined: Fri Jul 17, 2009 9:29 pm

Post by keto06 »

naw man take ur time.

96integra
Posts: 55
Joined: Thu Feb 18, 2010 9:52 am
Location: madison,wi

Post by 96integra »

ok thanks for helping me out man i appreciate it...so how long have you been tuning k-series? and how many? but yea will post i up on here once i get the logs in...i will log driving around and some WOT pulls..

96integra
Posts: 55
Joined: Thu Feb 18, 2010 9:52 am
Location: madison,wi

Post by 96integra »

ok i got some driving log in and some WOT logging on the 96teg map you got for me tell me what you think...i recorded along driving thing but didn't show it all? anyway help me out keto6 got you some logs thanks..Car seemed much faster..I think on my driving log i might of deleted it...i will do some more sunday..
Attachments
wot3.kdl
(380.46 KiB) Downloaded 234 times
wot2.kdl
(591.11 KiB) Downloaded 211 times
wot1.kdl
(349.94 KiB) Downloaded 194 times
log1.kdl
(153.06 KiB) Downloaded 204 times

96integra
Posts: 55
Joined: Thu Feb 18, 2010 9:52 am
Location: madison,wi

Post by 96integra »

Anyway you can tune it up too 8500rpm?

96integra
Posts: 55
Joined: Thu Feb 18, 2010 9:52 am
Location: madison,wi

Post by 96integra »

Im guessing your still tunning my logs?

Post Reply