K-Series Programmable ECU Calibration updates / downloads
-
xlRandy978x
- Posts: 11
- Joined: Wed Feb 17, 2010 12:56 pm
Post
by xlRandy978x »
im ganna try it out right now and datalog..be back soon
-
96integra
- Posts: 55
- Joined: Thu Feb 18, 2010 9:52 am
- Location: madison,wi
Post
by 96integra »
try mine out and let me kknow,...
-
xlRandy978x
- Posts: 11
- Joined: Wed Feb 17, 2010 12:56 pm
Post
by xlRandy978x »
here it is...let me know how it is
-
Attachments
-
- datalog.kdl
- (234.44 KiB) Downloaded 387 times
-
xlRandy978x
- Posts: 11
- Joined: Wed Feb 17, 2010 12:56 pm
Post
by xlRandy978x »
xlRandy978x wrote:here it is...let me know how it is
eh i couldnt really tell from a 3rd gear pull
-
96integra
- Posts: 55
- Joined: Thu Feb 18, 2010 9:52 am
- Location: madison,wi
Post
by 96integra »
whos mapping you use?
-
96integra
- Posts: 55
- Joined: Thu Feb 18, 2010 9:52 am
- Location: madison,wi
Post
by 96integra »
keto06 wrote:This graph was made on the original map. My map is slightly modified so numbers wont be exactly the same.
Mods Car was Tuned For:
Injen Cai
DC RH
HKS 65mm hi-power
RBC
IMG
8lb flywheel
Kpro (streettune)
can you send me the exact mapping for this one wanna try it out also...the johnnymap did good for me would also like to try the one that map that hp..
-
keto06
- Posts: 507
- Joined: Fri Jul 17, 2009 9:29 pm
Post
by keto06 »
No thats the original kal that the johnnykal is based upon.
Do a pull with the johnnykal if you want my help
-
xlRandy978x
- Posts: 11
- Joined: Wed Feb 17, 2010 12:56 pm
Post
by xlRandy978x »
so how come in vtec the lower boundry is higher then the upper boundry?low-4800 rpm and upper- 4500 rpm
-
keto06
- Posts: 507
- Joined: Fri Jul 17, 2009 9:29 pm
Post
by keto06 »
Not my kal, so I dunno.
With your o2 sensor being out theres not much I can do for you. Get that fixed and I would be more than happy to help.
Last edited by
keto06 on Sat Feb 20, 2010 12:48 pm, edited 1 time in total.
-
xlRandy978x
- Posts: 11
- Joined: Wed Feb 17, 2010 12:56 pm
Post
by xlRandy978x »
so can i get the kal you want me to datalog on?because the one above is with the messed up vtec boundry
-
keto06
- Posts: 507
- Joined: Fri Jul 17, 2009 9:29 pm
Post
by keto06 »
You did it with the right kal I think...the one from page 1...but you need an 02
-
96integra
- Posts: 55
- Joined: Thu Feb 18, 2010 9:52 am
- Location: madison,wi
Post
by 96integra »
so i was wondering...if i log it how do i save it and send it back? also how many pulls and what do you want displayed?
-
96integra
- Posts: 55
- Joined: Thu Feb 18, 2010 9:52 am
- Location: madison,wi
Post
by 96integra »
heres my datalog please help...keto6....should i do the pulls on open loop or closed loop cause these where on closed loop?
-
Attachments
-
- datalog 3.kdl
- (451.99 KiB) Downloaded 334 times
-
- datalog 2.kdl
- (453.96 KiB) Downloaded 281 times
-
- datalog 1.kdl
- (314.83 KiB) Downloaded 269 times
Last edited by
96integra on Sun Feb 21, 2010 4:11 pm, edited 1 time in total.