K-Series Programmable ECU Calibration updates / downloads
CalibratEd
Posts: 1430 Joined: Fri Feb 07, 2020 3:20 pm
Post
by CalibratEd » Wed Aug 04, 2021 7:46 pm
Load the new file and create a similar datalog. We are moving to 40 VTC
-Ed
Attachments
Bbert209Rev9.kal
(145.5 KiB) Downloaded 72 times
CalibratEd
Posts: 1430 Joined: Fri Feb 07, 2020 3:20 pm
Post
by CalibratEd » Tue Aug 10, 2021 8:43 am
Moving to VTC 50. Let me know how the car is running. Load the new file ans create a similar datalog.
-Ed
Attachments
Bbert209Rev11.kal
(148.38 KiB) Downloaded 67 times
Bbert209
Posts: 104 Joined: Wed Apr 21, 2021 2:04 am
Post
by Bbert209 » Tue Aug 10, 2021 1:02 pm
Car is running fine, no strange noises or weird idles, have noticed there is a gurgle in the exhaust as the tunes progress.
CalibratEd
Posts: 1430 Joined: Fri Feb 07, 2020 3:20 pm
Post
by CalibratEd » Tue Aug 10, 2021 7:08 pm
Moving to the 0VTC Vtec table. Load the file and create a normal driving log.
-Ed
Attachments
Bbert209Rev12.kal
(148.91 KiB) Downloaded 69 times
Bbert209
Posts: 104 Joined: Wed Apr 21, 2021 2:04 am
Post
by Bbert209 » Wed Aug 11, 2021 2:47 pm
Feels nice now that it kicks a little.
CalibratEd
Posts: 1430 Joined: Fri Feb 07, 2020 3:20 pm
Post
by CalibratEd » Thu Aug 12, 2021 8:38 pm
Create a normal driving Datalog with at least 2 WOT pulls. Start the WOT pull at 3000RPM and end it at 75000. When doing the WOT pull, make sure it is in 3rd gear and you hold the car at 3000RPM for 5 seconds before you do the pull.
-Ed
Attachments
Bbert209Rev13.kal
(150.65 KiB) Downloaded 63 times
CalibratEd
Posts: 1430 Joined: Fri Feb 07, 2020 3:20 pm
Post
by CalibratEd » Sat Aug 14, 2021 11:25 pm
Fuel looks good. Moving to VTEC VTC 10. Create a similar datalog.
-Ed
Attachments
Bbert209Rev14.kal
(144.35 KiB) Downloaded 65 times
Bbert209
Posts: 104 Joined: Wed Apr 21, 2021 2:04 am
Post
by Bbert209 » Sun Aug 15, 2021 9:03 am
And a p1259 code popped up