What are my options at this point other than the obvious one of trying to track down pins for the plug and running my wires directly to my switch/relay?
Is there anywhere else I can cut into for my switch & relay?
Kswapped w/ Nitrous Controls 4 Water/Meth Inj
-
NtegraDryvr
- Posts: 13
- Joined: Thu Aug 21, 2008 6:36 pm
Kswapped w/ Nitrous Controls 4 Water/Meth Inj
Alright I have a K24a2/JRSC swapped 98 DC4 Integra with water/meth system (no nitrous). I am running the Hybrid Racing dash harness that plugs into my Kpro'd PRB ecu using the white plug E. All of the input/outputs listed here have no wires or pins in the plug for them.
What are my options at this point other than the obvious one of trying to track down pins for the plug and running my wires directly to my switch/relay?
Is there anywhere else I can cut into for my switch & relay?
What are my options at this point other than the obvious one of trying to track down pins for the plug and running my wires directly to my switch/relay?
Is there anywhere else I can cut into for my switch & relay?
