After Toda cams are installed

K-Series Programmable ECU installation questions / support issues
Locked
macer
Posts: 37
Joined: Mon Sep 01, 2003 3:10 am
Location: Ireland

After Toda cams are installed

Post by macer » Fri Apr 20, 2007 6:28 am

I?m driving a Type R DC5 with a Toda manifold, J?SRacing exhaust and a K-Pro ecu running on 95 European octane fuel

Soon I?m going to have Toda A2 cams & springs installed. I will have to drive about 40 miles after the install to have the K-Pro remapped as the Mechanic installing the cams and the K-Pro tuner are in different areas. Question I have is will it be safe to make the trip or are the any precautions I should take or simply put should I not make the journey on my current map?

User avatar
Spunkster
Site Admin
Posts: 17932
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Fri Apr 20, 2007 10:03 am

You will have to look at datalogs and see how your A/F looks and check for knocks. You should not drive very hard.

GTI
Posts: 18
Joined: Tue Oct 14, 2003 6:51 pm

Post by GTI » Mon Apr 23, 2007 5:26 pm

I have used these cams many times.
Not a problem.

CivicVTi
Posts: 287
Joined: Mon Dec 15, 2003 1:51 pm
Location: Athens, Greece

Post by CivicVTi » Tue Apr 24, 2007 4:54 am

Just keep it below VTEC with closed loop 'on' and you will have no problem driving to your tuner.

Locked