Smoothing Wish List

ares650 · Post by **ares650** » Wed Aug 31, 2005 5:22 am

Can we have the Smoothing option from the S300 in the K-manager?

Thanks

stevenc · Post by **stevenc** » Wed Sep 07, 2005 6:18 am

You sir read my mind... i want it too!!!

Razathorn · Post by **Razathorn** » Wed Sep 07, 2005 8:51 am

What need is there for a smoothing function? Fuel values are fuel values right? When you tune it it should end up being smooth for the most part right? Mine have consistently come out smooth when I tune to 13 flat for the tune points... even when starting off with some crazy jacked up fuel curves, the still come out nice and smooth once tuned.

What is the purpose of the function? Even with the cam angles, I have found it best to smooth by eye and pay attention to your final bracket +/- 5 degrees cam dyno.

Am I missing something? I haven't done any B series or anything with the S line from hondata.

tryfe · Post by **tryfe** » Tue Sep 20, 2005 6:31 am

and smoothing there now is! Hmm...now how to go about using it..

ares650 · Post by **ares650** » Tue Sep 20, 2005 6:54 am

tryfe wrote:and smoothing there now is! Hmm...now how to go about using it..

for the kmanager their is inperplteing but no smoothing.
Interpolate, makes a stright line between points. Smoothing is a foumla that follow your flow and put your ponits into a smoother layout.

tryfe · Post by **tryfe** » Tue Sep 20, 2005 6:23 pm

ares650 wrote:
tryfe wrote:and smoothing there now is! Hmm...now how to go about using it..
for the kmanager their is inperplteing but no smoothing.
Interpolate, makes a stright line between points. Smoothing is a foumla that follow your flow and put your ponits into a smoother layout.

Version 1.2.0.9 has smoothing now..

ares650 · Post by **ares650** » Tue Sep 20, 2005 8:30 pm

cool...I was still on 1.2.0.8