K pro wont connect via Bluetooth after 4.4.6 update

K-Series Programmable ECU installation questions / support issues
Post Reply
Ecky
Posts: 22
Joined: Sun May 26, 2019 11:35 am

K pro wont connect via Bluetooth after 4.4.6 update

Post by Ecky »

Hi all,

A few days back I took the 4.4.6 update to KManager, and found that, after the update, my KPro was no longer showing up in the "Select Bluetooth Device" window.

I checked in Windows and verified KPro was paired - which it was. So I deleted it, uninstalled the driver, then re-paired it. I can see it in Windows, but in KManager it still doesn't appear.

The next thing I tried was connecting via USB. This worked immediately, and I was asked to send a firmware update. After that, I re-flashed my calibration, disconnected from USB, and tried connecting via BT again - same deal. I even reconnected via USB and changed my pin, uploaded that, re-paired with KPro in Windows using the new pin, and still nothing.

Any ideas?
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: K pro wont connect via Bluetooth after 4.4.6 update

Post by Spunkster »

Did you upload your calibration to the ECU after the firmware was updated?
Ecky
Posts: 22
Joined: Sun May 26, 2019 11:35 am

Re: K pro wont connect via Bluetooth after 4.4.6 update

Post by Ecky »

Yep!
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: K pro wont connect via Bluetooth after 4.4.6 update

Post by Spunkster »

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
Ecky
Posts: 22
Joined: Sun May 26, 2019 11:35 am

Re: K pro wont connect via Bluetooth after 4.4.6 update

Post by Ecky »

Great, can do!
Post Reply