17-1 ERROR CODE but do not know why!

K-Series Programmable ECU installation questions / support issues
Post Reply
MoDabz
Posts: 3
Joined: Sun Feb 28, 2021 8:50 pm

17-1 ERROR CODE but do not know why!

Post by MoDabz »

I recently bought a kpro v4 w/ECU from Tri State Motors for my 2002 rsx type s. the car is basically completely stock aside from innovative mounts, stage 2 clutch and a custom cold air intake... I went to upload a basemap today, the k20a2 with cold air- dyno tuned, I drive the car and vtec DOES NOT engage at all. I don't end up getting my CEL to come on until its like 5-7 mins driving it and I get a 17-1 VSS malfunction when the whole time Im driving the MPH works and my RPM works even after the CEL comes on. I plug my stock ecu in and vtec and everything engages just fine... If anyone could possibly shed some light on this issue id greatly appreciate it! just incase!! to clarify the ecu with the kpro installed in it IS NOT the same as my stock ecu.
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: 17-1 ERROR CODE but do not know why!

Post by Hondata »

What ECU is it? An automatic ECU with the VSS circuit like a PND?
Hondata
Post Reply