AEM 30-4110 wb with PNF tune and ecu
-
- Posts: 36
- Joined: Fri Jun 18, 2004 12:40 pm
- Location: vegas
AEM 30-4110 wb with PNF tune and ecu
I'm running PNF ECU and tune, I want to run AEM 30-4110 as primary O2. I have all this installed already and now finding that PNF tunes do not allow external Wideband. I would think I could at worst start with a new tune from PRB file but will there be an issue with the PNF ECU?
Re: AEM 30-4110 wb with PNF tune and ecu
You will have to use the PRB calibration and it will work in the PNF ECU.
Re: AEM 30-4110 wb with PNF tune and ecu
Where can I find a prb calibration though? Every calibration in the vault for the k20a3 are pnf. I have the aem Wideband and want to use it with my kpro.
Re: AEM 30-4110 wb with PNF tune and ecu
Click on the New Calibration button at the top of the software.