Australian CRV ECU options

K-Series Programmable ECU installation questions / support issues
Post Reply
vroomwootwoot
Posts: 4
Joined: Tue May 12, 2020 2:48 am

Australian CRV ECU options

Post by vroomwootwoot »

I have an Australian 2002 Manual HONDA CRV with ecu #37820-PPA-Q02. Now from what I read the Australian ECU is no good for KPRO.
I was just inquiring as to which ECU is the best alternative to use in my car.

vroomwootwoot
Posts: 4
Joined: Tue May 12, 2020 2:48 am

Re: Australian CRV ECU options

Post by vroomwootwoot »

ECU PLUG END.jpg
ECU PLUG END.jpg (636.55 KiB) Viewed 117 times
ECU CIRCUIT BOARD.jpg
ECU CIRCUIT BOARD.jpg (1.56 MiB) Viewed 117 times

User avatar
Spunkster
Site Admin
Posts: 18786
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Australian CRV ECU options

Post by Spunkster »

I'm sorry, but that ECU is not supported. If you try to use a different ECU you may have issues with errors or sensor that do not work correctly.

vroomwootwoot
Posts: 4
Joined: Tue May 12, 2020 2:48 am

Re: Australian CRV ECU options

Post by vroomwootwoot »

Are they the same pinout and would be a case of changing out sensors with compatible ones? Or is it in the circuitry/more complicated than that?

User avatar
Spunkster
Site Admin
Posts: 18786
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Australian CRV ECU options

Post by Spunkster »

I do not know, as we do not support that ECU or the vehicle that it comes from.

vroomwootwoot
Posts: 4
Joined: Tue May 12, 2020 2:48 am

Re: Australian CRV ECU options

Post by vroomwootwoot »

Thanks for your time anyway mate.

Post Reply