AEM 30-0300 Wideband Integration with Kpro v4

K-Series Programmable ECU installation questions / support issues
Bilalicious
Posts: 16
Joined: Sun Apr 05, 2020 2:28 am

Re: AEM 30-0300 Wideband Integration with Kpro v4

Post by Bilalicious »

I shall take a datalog tomorrow and post it here.


Thanks.

Bilalicious
Posts: 16
Joined: Sun Apr 05, 2020 2:28 am

Re: AEM 30-0300 Wideband Integration with Kpro v4

Post by Bilalicious »

Hurray!
I finally have AFR in my datalogs. Managed to smooth the cruising AFRs but its pretty erratic on otherwise.
Attachments
8759C79D-2140-47F6-A920-9203CB7FA84D.jpeg
8759C79D-2140-47F6-A920-9203CB7FA84D.jpeg (59.36 KiB) Viewed 209 times

typer86
Posts: 328
Joined: Sun Oct 28, 2012 3:17 pm

Re: AEM 30-0300 Wideband Integration with Kpro v4

Post by typer86 »

Hi,
I have also the AEM 30-0300 wideband on the Kpro v4.
But I see on the lambda overly the voltage in the KManager 4.4.3.... Did I have something configured wrong? It will not converted into the AF or lambda readings... :-(

Kpro <> Analog_Gauge wiring
Wideband_Voltage_kpro_wire.jpg
Wideband_Voltage_kpro_wire.jpg (313.97 KiB) Viewed 161 times
KManager configuration:
Wideband_Voltage_1.png
Wideband_Voltage_1.png (66.74 KiB) Viewed 161 times
Wideband_Voltage_2.png
Wideband_Voltage_2.png (20.08 KiB) Viewed 161 times
Wideband_Voltage_3.png
Wideband_Voltage_3.png (62.61 KiB) Viewed 161 times
Wideband_Voltage_4.png
Wideband_Voltage_4.png (28.73 KiB) Viewed 161 times
Can someone tell me whats wrong? I think I did not have correctly configured the KManager to display the valid data. But I could not find the issue... So strange.

typer86
Posts: 328
Joined: Sun Oct 28, 2012 3:17 pm

Re: AEM 30-0300 Wideband Integration with Kpro v4

Post by typer86 »

KManager configured to show AFR readings.
Wideband_Voltage_5.png
Wideband_Voltage_5.png (117.41 KiB) Viewed 161 times
Attached you find the start calibration and datalog for this.
LPtune_EP3_v1.02.kal
(163.47 KiB) Downloaded 10 times
datalog LP Ep3v1.02_short.kdl
(4.39 MiB) Downloaded 13 times

User avatar
Hondata
Site Admin
Posts: 9327
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: AEM 30-0300 Wideband Integration with Kpro v4

Post by Hondata »

Please be patient - it is going to take about two weeks before we can test this.
Hondata

Post Reply