KManager Datalog Table Issue

K-Series Programmable ECU installation questions / support issues
Post Reply
DC5teggi
Posts: 15
Joined: Mon Apr 23, 2018 12:59 pm
Location: South Carolina
Contact:

KManager Datalog Table Issue

Post by DC5teggi »

On the latest available update (4.4.2), when viewing a datalog, the tables are no longer automatically updating to represent the cam angle used. Is this a known issue?

To clarify, if I am viewing the 50 cam angle fueling table and press play on the datalog, it no longer jumps to the appropriate cam angle. It will automatically jump to the high or low speed tables properly, though.

I believe this issue is universal, but just in case, below are my specs:
- Vehicle: 2003 Acura RSX Base
- K-Pro Serial Number: 47443
- KManager Version: 4.4.2.0
- ECU part number/serial number: 37820-PND-A03 / 2062-200505
2003 Acura RSX - K20A3
PND ECU with K-Pro v4
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: KManager Datalog Table Issue

Post by Spunkster »

Post your calibration and a datalog showing the issue.
DC5teggi
Posts: 15
Joined: Mon Apr 23, 2018 12:59 pm
Location: South Carolina
Contact:

Re: KManager Datalog Table Issue

Post by DC5teggi »

It doesn't matter what calibration file or datalog I'm using. I've tried multiple (including stock calibrations) - it's a KManager related issue. The issue was not present before I updated to 4.4.2 - the tables would automatically jump to the appropriate cam angle for that point in the datalog.

I've attached the files anyways, though.
Attachments
clay DRIVEN 191209.kal
(174.21 KiB) Downloaded 88 times
191206-1.kdl
(403.56 KiB) Downloaded 90 times
2003 Acura RSX - K20A3
PND ECU with K-Pro v4
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: KManager Datalog Table Issue

Post by Spunkster »

The datalog you have provided is working as it should. Make sure you go to the Options menu and that tables follow Cam Angle and tables follow VTEC are checked.
DC5teggi
Posts: 15
Joined: Mon Apr 23, 2018 12:59 pm
Location: South Carolina
Contact:

Re: KManager Datalog Table Issue

Post by DC5teggi »

Hah. I was hoping it was something that simple. Somehow that option got turned off during the update then, since I never activated it. Thanks!
2003 Acura RSX - K20A3
PND ECU with K-Pro v4
Post Reply