I'm new to the forum, and have a few questions. I just finished a 92 integra gsr with a k20/k24 swap, rsx type s engine harness, type s ecu with kpro v4. For whatever reason, it seems disabling the multiplexer, ELD, and secondary o2 sensor options seem to have no effect. I still get codes P1298, P0600, P0141 (Keep in mind, the 92 integras do NOT have ELD). I just got the exhaust bolted up today and attempted to drive the car but it runs horribly. Another issue is that the map sensor may be bad as the readings were not changing on the kpro app. I will be replacing the map tomorrow though.
While researching, I saw people mentioning "disabling OBDII" or "enable emissions error checking" options but that may have been on an outdated version
any insight would be appreciated
Issues with kmanager options
-
- Posts: 5
- Joined: Sat Oct 05, 2019 8:44 pm
Issues with kmanager options
- Attachments
-
- Screenshot_20191005-184303_Hondata.jpg (1.01 MiB) Viewed 1132 times
-
- Capture2.PNG (42.03 KiB) Viewed 1132 times
-
- Capture.PNG (54.87 KiB) Viewed 1132 times
-
- Posts: 5
- Joined: Sat Oct 05, 2019 8:44 pm
Re: Issues with kmanager options
Here's some more info...
- Attachments
-
- Capture3.PNG (42.52 KiB) Viewed 1131 times
-
- kprov41.kal
- (163.13 KiB) Downloaded 76 times
-
- Posts: 5
- Joined: Sat Oct 05, 2019 8:44 pm
Re: Issues with kmanager options
ecu 37820-PRB-A03
Not sure why pic is upside down
Not sure why pic is upside down
- Attachments
-
- 20191006_003404.jpg (3 MiB) Viewed 1130 times
-
- Posts: 5
- Joined: Sat Oct 05, 2019 8:44 pm
Re: Issues with kmanager options
I replaced the MAP sensor today, but it didn't help with how bad the car is running. It seems like storing the calibration has no effect on the ecu, even though retrieving the calibration is identical to the one uploaded.
-
- Posts: 5
- Joined: Sat Oct 05, 2019 8:44 pm
Re: Issues with kmanager options
why do these errors keep coming up? I must be missing something here.
- Attachments
-
- Capture4.PNG (75.04 KiB) Viewed 1117 times
Re: Issues with kmanager options
Have you uploaded the calibration to the ECU once you made the changes?