Closed loop on start up HELP!!!!
-
- Posts: 7
- Joined: Sun Jul 08, 2018 8:27 pm
Closed loop on start up HELP!!!!
I believe I am in closed loop on start up which brings my air to 7.something until the Wideband 02 starts reading and corrects this. I am only running a Wideband. What do I need to do to stop the rich on start up? Please hep!!!
Re: Closed loop on start up HELP!!!!
You will need to provide more details as well as the calibration and a datalog showing the issue.
-
- Posts: 7
- Joined: Sun Jul 08, 2018 8:27 pm
Re: Closed loop on start up HELP!!!!
well this is the datalog. What you mean by calibration? you meaning my tune?
- Attachments
-
- start-up-7-14-19.kdl
- (1.34 MiB) Downloaded 99 times
Re: Closed loop on start up HELP!!!!
Your o2 is not warming up quickly. I suspect that the o2 heater is broken.
Hondata
-
- Posts: 7
- Joined: Sun Jul 08, 2018 8:27 pm
Re: Closed loop on start up HELP!!!!
Its a brand new inovate motorsport afr gage and sensor.
Re: Closed loop on start up HELP!!!!
Sorry, I thought it was the factory o2 sensor. The answer is much the same - its taking too long to warm up. Normal warm up is 15 seconds.
Hondata
-
- Posts: 7
- Joined: Sun Jul 08, 2018 8:27 pm
Re: Closed loop on start up HELP!!!!
That’s about how long it takes so in return it spits and sputters till then.
Re: Closed loop on start up HELP!!!!
I have the same issue the car acts funny trying to go in closed look but my innovate wideband isn't warm yet, Daniel from church automotive told me to limit the amount of short term correction the ecu can do but what works for me is if I turn the key on and let the sensor work up before I start the car
-
- Posts: 7
- Joined: Sun Jul 08, 2018 8:27 pm
Re: Closed loop on start up HELP!!!!
Where do you have the guage getting power from?Korn4900 wrote: ↑Thu Sep 05, 2019 12:20 pm I have the same issue the car acts funny trying to go in closed look but my innovate wideband isn't warm yet, Daniel from church automotive told me to limit the amount of short term correction the ecu can do but what works for me is if I turn the key on and let the sensor work up before I start the car