I'm planning on making my own harness for a CAN based dash and wanted to use new wires instead of soldering the pigtails of the connectors. A quick search on here hasn't provided any information on the pins used for the connectors.
Is there a link or a part number that anyone can provide for these pins?
Thanks
K-Pro v4 Digital/Analog Connector Pins
K-Pro v4 Digital/Analog Connector Pins
Timothy CM55 K24A2 TVS2300
Re: K-Pro v4 Digital/Analog Connector Pins
Thanks for the link, but I was looking for the metal terminals that are crimped on to the wire. I found some terminals on DigiKey that look like they are the same style, but I wanted to ask here first.
Timothy CM55 K24A2 TVS2300