Page 1 of 2

Kpro4 Alternate Speed Input

Posted: Sun Dec 02, 2018 9:18 pm
by AREA876
92 Honda Civic
Kpro: 48429
Version: 4.3.6.0
ECU: 37820-PND-A55 SN: 2063-503531
K20A3 Base Map.kal
(160.31 KiB) Downloaded 157 times
I have a question about the alternate speed input, the Kpro4 vss input and the original vss are they both to display the same values?
VSS Input.png
VSS Input.png (10.04 KiB) Viewed 9229 times

Re: Kpro4 Alternate Speed Input

Posted: Mon Dec 03, 2018 5:34 pm
by Spunkster
No they will not.

Re: Kpro4 Alternate Speed Input

Posted: Fri Mar 15, 2019 11:29 am
by AREA876
Using the VSS input for the alternate speed on kpro 4 will the ECU know what gear you are in ?

Re: Kpro4 Alternate Speed Input

Posted: Mon Mar 18, 2019 10:05 am
by Spunkster
I believe it will.

Re: Kpro4 Alternate Speed Input

Posted: Fri Apr 05, 2019 6:51 pm
by AREA876
I am having problem with my alternate speed set-up. The input works but when viewing the datalog my gear is not switching and I am also getting a VSS error.
Vehicle: 92 Honda Civic
Serial No.48439
Version:4.4.0
ECU:37820-PND-A55
Engine: JDM K20A (K20A3)
K20A3 Base Map.kal
(159.82 KiB) Downloaded 146 times
K20A3 Base Map.kdl
(2.3 MiB) Downloaded 152 times

Re: Kpro4 Alternate Speed Input

Posted: Sun Apr 07, 2019 1:24 pm
by Hondata
What sort of transmission speed sensor is it? How did you set the pulses per distance?

Re: Kpro4 Alternate Speed Input

Posted: Sun Apr 07, 2019 8:33 pm
by AREA876
The sensor is getting it's reading from the gear by the final drive, I currently have the pulses maxed out at 499999 per mile and I still can't get speed to match GPS
Pulse setting.png
Pulse setting.png (25.86 KiB) Viewed 9006 times
Speed sensor .png
Speed sensor .png (100.59 KiB) Viewed 9006 times

Re: Kpro4 Alternate Speed Input

Posted: Mon Apr 08, 2019 9:52 am
by Spunkster
Have you tried following the instructions listed at: https://www.hondata.com/tech-alternativ ... ngine-swap

Re: Kpro4 Alternate Speed Input

Posted: Mon Apr 08, 2019 10:35 am
by AREA876
I have tried going lower with the pulse but the reading seems to get worst. At 499999 it's about 10 mph off, but I still get a VSS error

Re: Kpro4 Alternate Speed Input

Posted: Mon Apr 08, 2019 11:22 am
by Spunkster
What transmission are you using?

Re: Kpro4 Alternate Speed Input

Posted: Mon Apr 08, 2019 11:33 am
by AREA876
Transmission is V2M3 from a Honda Stream

Re: Kpro4 Alternate Speed Input

Posted: Mon Apr 08, 2019 2:34 pm
by Spunkster
Does this us a counter shaft speed sensor?

Re: Kpro4 Alternate Speed Input

Posted: Mon Apr 08, 2019 3:39 pm
by AREA876
No, sensor is coupled to final drive

Re: Kpro4 Alternate Speed Input

Posted: Mon Apr 08, 2019 4:42 pm
by Hondata
If the speed sensor is the final drive type (not the 3rd gear sensor) then your pluses per mile should be in the 10,000 range not 500,000 range.

Re: Kpro4 Alternate Speed Input

Posted: Mon Apr 08, 2019 5:59 pm
by AREA876
Setting the pulse to 10,000 per mile resulted in 336 mph
10000 pulse 336 mph.png
10000 pulse 336 mph.png (138.14 KiB) Viewed 8987 times
K20A3 Base Map.kal
(159.82 KiB) Downloaded 177 times