JDM DC5 Type R w/ USDM PND ECU

K-Series Programmable ECU installation questions / support issues
Post Reply
jackyft
Posts: 25
Joined: Sat Dec 10, 2016 8:47 am

JDM DC5 Type R w/ USDM PND ECU

Post by jackyft »

Dear All,

I have a question that if I have a USDM ECU 32820-PND-A07, is it possible to install to a JDM Integra DC5 Type R w/ K-Pro V4? I do some research it need to swap cable between E1 and E10 for fuel pump. Is it true?

Thanks in advance.

Jacky
Top
User avatar
Spunkster
Site Admin
Posts: 22820
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: JDM DC5 Type R w/ USDM PND ECU

Post by Spunkster »

You do not need to make any changes for the fuel pump. You will also not have reverse lockout for the 6 speed transmission, unless you wire the reverse lock-out to the secondary runner output on the PND ECU.
Top
Post Reply

Return to “K-Pro / KManager”