cant get afr on datalogs

K-Series Programmable ECU installation questions / support issues
Post Reply
james wheeler
Posts: 6
Joined: Fri Jun 01, 2018 11:24 am

cant get afr on datalogs

Post by james wheeler »

so my laptop that I had done all my callibrations and data logging on has died a death but everything was set up. iv recenty up graded the fuel system but kept the injectors and fuel pressure the same to try and avoid running to lean. but with my new pc I cant remember how to get the true afr (which I can get up in the display tab under anolog1) onto my data logs it just show my target afr of about 14.7 in the closed loop tab of the logs.
please help, its getting on my wick
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: cant get afr on datalogs

Post by Spunkster »

Can you post your calibration and a datalog made using that calibration please?
james wheeler
Posts: 6
Joined: Fri Jun 01, 2018 11:24 am

Re: cant get afr on datalogs

Post by james wheeler »

hi thanks for the reply, managed to sort the issue in the meantime. had to check a box in parameters.
Post Reply