S2000 kpro wiring for race car

K-Series Programmable ECU installation questions / support issues
Post Reply
Malkolm666
Posts: 48
Joined: Thu Aug 09, 2007 6:06 am

S2000 kpro wiring for race car

Post by Malkolm666 »

Hi, Im building a race harness for a track car. It has a F20c engine and a PRB ecu with kpro v4 build for the s2000.

The owner has lost the harness for the new Camsensor and Cranksensor. What pinout should I wire them to?

We have a RSX primary wideband lambda, what do I need to do to make it work?
(In the manual you say that to use a narrowband and change settings to use secondary lambda in kpro).

Thanks!
/Malkolm
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: S2000 kpro wiring for race car

Post by Hondata »

Can you give us the KPro serial number and the ECU serial number?

You can't use the RSX wideband. If you want a wideband then use an aftermarket wideband and feed the output in the ECU or the KPro.
Hondata
Malkolm666
Posts: 48
Joined: Thu Aug 09, 2007 6:06 am

Re: S2000 kpro wiring for race car

Post by Malkolm666 »

2054-101582

43342
Malkolm666
Posts: 48
Joined: Thu Aug 09, 2007 6:06 am

Re: S2000 kpro wiring for race car

Post by Malkolm666 »

Please respond asap, car is supposed to go on the dyno tomorrow. Ive already wired in a innovate gauge and lqmbda to the kpro.

Now its just the cam & crank sensors I need to wire correctly.
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: S2000 kpro wiring for race car

Post by Hondata »

Replied to your emails.
Hondata
Malkolm666
Posts: 48
Joined: Thu Aug 09, 2007 6:06 am

Re: S2000 kpro wiring for race car

Post by Malkolm666 »

Thanks!
fonzeka
Posts: 98
Joined: Thu Feb 11, 2016 4:15 am
Location: Sweden

Re: S2000 kpro wiring for race car

Post by fonzeka »

Second S2000 with Kpro here in Sweden? Nice :)
Post Reply