Page 1 of 1

PRB showing up as PRA in K Manager

Posted: Wed Nov 18, 2015 8:09 am
by M111
Hi,

My PRB ECU shows up as a PRA in the K manager software, I'm in the UK so guessing someone has fitted a board programed for a PRA into the PRB.

Questions is, will this cause any problems with the software or ECU?

Re: PRB showing up as PRA

Posted: Wed Nov 18, 2015 9:44 am
by curtusz
Pra is the standard ecu in uk unless you have an import

Re: PRB showing up as PRA in K Manager

Posted: Wed Nov 18, 2015 12:05 pm
by Spunkster
If you have a PRB ECU then you should use a PRB based calibration.

Re: PRB showing up as PRA in K Manager

Posted: Thu Nov 19, 2015 9:23 am
by M111
Just uploaded a PRB cal to it & it now shows as a PRB, the one it came with must have been a modified PRA cal.
I assumed it was reporting the ecu type, not the cal file.
Cheers.