K-Series Programmable ECU installation questions / support issues
- Posts: 2
- Joined: Sun Aug 16, 2015 12:37 pm
Is there a file or can somebody help me with the wiring for the OBD2 port, it's a k24 on an EG with a custom harness, just need the pins location.
thanks in advance.
- Site Admin
- Posts: 8881
- Joined: Thu Aug 15, 2002 12:13 pm
- Location: Torrance, CA
Pins 4 and 5 = ground
Pin 7 = K-Line ECU pin E23
Pin 9 = SCS ECU E29 (not required)
Pin 16 = +12V