Tuning a customer, they have their UEGO connected to one of the analog inputs on his K-Pro V3. No voltage/airfuel is being reported.
I thought it could be that the user just had it on the wrong analog input, but I set all analog inputs for the 30-4100 wideband to see. All inputs report .68V.
He states that his gauge is reading fine. Customer has +12v power from steering column, and grounded behind the glovebox. UEGO white signal wire is soldered to Analog 1 input.
Attached is the datalog.
EDIT: User will be posting pictures of their installation of the gauge and wires soon.
K-Pro Analog inputs don't read UEGO
K-Pro Analog inputs don't read UEGO
- Attachments
-
- jake_noinput.kdl
- (3.34 MiB) Downloaded 113 times
magnEsium Tuning
http://www.magtuning.com
http://www.magtuning.com
-
- Posts: 1
- Joined: Sat Jan 19, 2013 4:18 pm
Re: K-Pro Analog inputs don't read UEGO
Here's the pictures of the installation and the uego gauge reading.
- Attachments
-
- image.jpeg (1.54 MiB) Viewed 1272 times
-
- image (1).jpeg (1.58 MiB) Viewed 1272 times
Re: K-Pro Analog inputs don't read UEGO
Disregard this thread, user has fixed the issue. Harness was upside down.
magnEsium Tuning
http://www.magtuning.com
http://www.magtuning.com