Kpro and inmobilizer

K-Series Programmable ECU installation questions / support issues
Post Reply
jdmvtec93
Posts: 19
Joined: Mon Jan 29, 2007 3:14 pm
Location: Puerto Rico

Kpro and inmobilizer

Post by jdmvtec93 »

i have my original ECU with kpro, i loaded a calibration and the inmobilizer dont want to work. as soon as i enable the inmobilizer the car wont start (ECU, Key and Switch are Original)

What should i do?
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

What is the code on the side of the ECU?
jdmvtec93
Posts: 19
Joined: Mon Jan 29, 2007 3:14 pm
Location: Puerto Rico

Post by jdmvtec93 »

there is no code just when i enable the immobilizer the car wont start.

one thing i did was to try to download the calibration that was on the ECU to my laptop, because before that it was working ok.
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

There has to be a sticker with the model number on the side of the ECU.
jdmvtec93
Posts: 19
Joined: Mon Jan 29, 2007 3:14 pm
Location: Puerto Rico

Post by jdmvtec93 »

Spunkster wrote:There has to be a sticker with the model number on the side of the ECU.


ok

37820-prb-a05

2068-506714
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

You must turn the key off and back on before starting it after enabling the immobilizer. IF it still does not work you will have to take it to a Acura dealer to have the immbilizer rematched to the ECU.
Post Reply