Page 1 of 1

K24 into a VW Baja

Posted: Wed Jun 27, 2018 10:21 pm
by SoCalBaja
I just picked up a K24A RBB-2. The JDM shop gave me a ECU. It’s number 37820-PND-J01. Can that be reflashed to work with a kpro system on this engine? I plan on using a RSX Type S engine harness and Rywire power harness. Does all this sound right for a stand alone system in a VW Baja Bug?

Re: K24 into a VW Baja

Posted: Thu Jun 28, 2018 12:02 pm
by Spunkster
Unfortunately that ECU is not compatible with K-Pro. What transmission are you using with this?

Re: K24 into a VW Baja

Posted: Thu Jun 28, 2018 11:05 pm
by SoCalBaja
I called HASPORT.COM today and they said it would work. What ecu do I need then?
I have a K24 RBB-2, RSX-S wiring harness.

I’m using the VW tranny. I’m putting the K24 in my 1970 VW Baja Bug.

Re: K24 into a VW Baja

Posted: Fri Jun 29, 2018 6:20 am
by SoCalBaja
Spunkster wrote: Thu Jun 28, 2018 12:02 pm Unfortunately that ECU is not compatible with K-Pro. What transmission are you using with this?
It says PND ecu.

Re: K24 into a VW Baja

Posted: Fri Jun 29, 2018 6:35 am
by SoCalBaja
Will this one work?

Re: K24 into a VW Baja

Posted: Fri Jun 29, 2018 9:56 am
by Spunkster
The Japanese PND will not work. The US PND will work (A08).

Re: K24 into a VW Baja

Posted: Thu Jan 19, 2023 12:21 am
by Kawikilla
Can you explain to me how you’re putting the ka on a vw trans? Is there an adapter plate out there? Very interested in do that swap on my 70s sandrail, do you have a social media that has finished swap I can reference?