Hondata Group N question

Questions / support for the K-Series ECU re-flash
Post Reply
hexer4u
Posts: 3
Joined: Sat Jun 23, 2012 5:14 pm

Hondata Group N question

Post by hexer4u »

Hello

Does Hondata Group N work on 2010 FN2 models, or only 2007-2008?
On the details page says 2007-2008, but have to be sure.
http://www.hondata.com/reflash_07_euro_ctr.html

If required, I can provide the serial number.

Thanks
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Hondata Group N question

Post by Hondata »

Is should work with all FN2, but get the ECU part number if you can.
Hondata
hexer4u
Posts: 3
Joined: Sat Jun 23, 2012 5:14 pm

Re: Hondata Group N question

Post by hexer4u »

Not sure which is the part number, but here is a picture of the unit.

http://myplaceon.net/DSCN4517.JPG
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Hondata Group N question

Post by Hondata »

Is that the Group N ECU or stock ECU? If it is not the stock ECU, can you post the part number? (which is the 37820- part).
Hondata
hexer4u
Posts: 3
Joined: Sat Jun 23, 2012 5:14 pm

Re: Hondata Group N question

Post by hexer4u »

RRB-A12
4744-137978
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Hondata Group N question

Post by Spunkster »

What is the part number of the stock ECU from the vehicle?
Post Reply