Australian CL9 K24A3 - What ECU to use?

Hondata model coverage & ECU application questions.
Post Reply
Sufz
Posts: 2
Joined: Sun Sep 06, 2020 10:00 pm

Australian CL9 K24A3 - What ECU to use?

Post by Sufz »

Hey guys,

Looking to boost a Honda Accord Euro CL9A here in Aus.
Wanting to run the following:

- Stock K24A3 with a GTX3071
- 50 deg VTC (Stock they've got a 25 deg VTC)
- Flex fuelling preferably
- Stock drive by wire throttle

My understanding is the FlashPro will do the job, but will I see any issues with the Aussie ECU, drive by wire, VTC or flex?

Thanks!
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Australian CL9 K24A3 - What ECU to use?

Post by Spunkster »

What is your ECU part number?
Senpoii
Posts: 2
Joined: Mon May 18, 2020 4:23 am

Re: Australian CL9 K24A3 - What ECU to use?

Post by Senpoii »

Spunkster wrote: Tue Sep 08, 2020 9:21 am What is your ECU part number?
I have a similar setup to OP plus an 08 AT TSX ecu, was wondering if flex fuel was possible with the flashpro?
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Australian CL9 K24A3 - What ECU to use?

Post by Spunkster »

Only US vehicles are supported.
Senpoii
Posts: 2
Joined: Mon May 18, 2020 4:23 am

Re: Australian CL9 K24A3 - What ECU to use?

Post by Senpoii »

So having a TSX ecu alongside the flashpro is not enough to set up flex fuel? Or flashpro is not supported at all on these vehicles
Sufz
Posts: 2
Joined: Sun Sep 06, 2020 10:00 pm

Re: Australian CL9 K24A3 - What ECU to use?

Post by Sufz »

37820-RBB-A21
Post Reply