VSS calibration

Hondata model coverage & ECU application questions.
Post Reply
Brock
Posts: 16
Joined: Sat Jan 28, 2012 8:59 am

VSS calibration

Post by Brock » Sat Aug 11, 2012 7:55 pm

I think all versions of FlashPro should have a provision to change the VSS calibration to accommodate different tire sizes and/or gear changes.

User avatar
Hondata
Site Admin
Posts: 8811
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: VSS calibration

Post by Hondata » Sun Aug 12, 2012 4:29 pm

For some vehicles, the speed sensor signal goes to the cluster directly and the ECU cannot change the speedometer / odometer calibratrion.
Hondata

Brock
Posts: 16
Joined: Sat Jan 28, 2012 8:59 am

Re: VSS calibration

Post by Brock » Sun Aug 12, 2012 5:16 pm

I probably should have made the comment specific to the TSX. In which case the VSS goes directly to the ECU, which generates speed data for the cluster. It seems to be getting more common for people to swap the gears in the TSX trans with RSX or Civic Si gears.

User avatar
Hondata
Site Admin
Posts: 8811
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: VSS calibration

Post by Hondata » Wed Aug 22, 2012 7:59 am

07 or 09 ?
Hondata

Brock
Posts: 16
Joined: Sat Jan 28, 2012 8:59 am

Re: VSS calibration

Post by Brock » Wed Aug 22, 2012 8:26 am

First gen... 07' ~ 08'.

User avatar
Hondata
Site Admin
Posts: 8811
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: VSS calibration

Post by Hondata » Wed Aug 22, 2012 10:09 am

Ok, I can add the dash speed fairly easily.
Hondata

Brock
Posts: 16
Joined: Sat Jan 28, 2012 8:59 am

Re: VSS calibration

Post by Brock » Wed Aug 22, 2012 5:35 pm

Hondata wrote:Ok, I can add the dash speed fairly easily.
Image

Post Reply