Hondata

dyno tune the map is not for that much compression fuel table needs more adjusting do you have a wideband on the car

yes this is correct

ctrl-j

vtec wiring is only 1 wire i highly doubt itll b that much more work

get a 4bar for the resolution as you can always scale it down for what you need and the hondata is $100 the speedfactory is $100 the aem is lil bit more $ and install is lil more tricky depending on manifold you have but believe me itll b less headache on you with either of those 2 sensor and u shou...

those map sensors are 1million % garbage i have had issues with them on the dyno repeatedly your best option would be get a 'aem,speedfactory,hondata" i have had nothing but great tunes with all 3 of those my opinion would b to put back the oem honda map sensor and wait till you get a better 3b...

that video is of the map that is loaded on there now and your map sensor settings is set to custom? what brand map sensor are you using? if setup incorrectly vaume vs load will cause car to not drive properly no matter what you do also i did some adjustments to the map you posted since it seem to be...

post the map that you are using
in the mean time post picture of your engine bay good clean picture

i tuned a car
96 toyota corolla with chipped p28 and worked out fine all the electrical was done by a local mechanic and eveything worked very well no issues

if you post your file with logs itll b a lil easier to adjust the map even tho the dyno tune will b more better

load factory b16 map step 1 now on the low cam fuel tables select colum 1 from top to bottom set value to 50 step 2 now select colum 10 from top to bottom set value to 750 step 3 now select entire colums from 1 to 10 and right click click interpolate now fuel map is setup step 4 now go to parameters...

load the b20 map and change the injectors size to 1k and add bout 40% to the fuel map for the compression difference and e85 and you'll have to do some adjustments to get the idle correct on pro2 cams but its pretty easy once car is started and good afr if you have a wideband

load a b16 map change map sensor and injectors and get car to idle and you should be able to get it to a tuner

AREA876 wrote:I would love the ability to plot a graph of Target Lambda and the actual Lambda.

would definitely enjoy this

post a datalog the fuel & ign map need alot of tweaking wats full specs on motor