Search found 137 matches
- Thu Aug 29, 2013 1:22 am
- Forum: S2000 2006-2009 Americas/Europe/Asia
- Topic: Closed loop - wide swings
- Replies: 6
- Views: 6494
Closed loop - wide swings
I searched before posting. Background: 06 s2k drive by wire, returnless fuel setup, PTE5862 turbo on sidewinder, e85 fuel, KB Boost-a-Pump. Tuner never installed oem wideband, so I spent a month in open loop, with zero issues believe it or not. Very good part throttle tune. But I obviously know this...
- Thu Aug 29, 2013 12:03 am
- Forum: s300 / SManager
- Topic: fuel pressure decreased two datalogs
- Replies: 4
- Views: 1830
Re: fuel pressure decreased two datalogs
It leaned up everywhere. Glad you got the launch to 10psi. If you tuned @70psi make sure you always run the car @70psi. Keep an eye on fuel pressure you may have a regulator or fuel pump quitting on you if you have to keep raising the pressure to hit 70psi. I will keep an eye on it. thank you I mad...
- Wed Aug 28, 2013 8:26 pm
- Forum: s300 / SManager
- Topic: Low 10 second datalog
- Replies: 10
- Views: 3584
Re: Low 10 second datalog
sorry its been a while. I found out I need to make some susspension adjustments. A few months ago I set the front sturts so the front end could only lift 1 inch before the struts limited the lift. I noticed that the car now lifts to one inch and goes down the track with no susspension travel. It is...
- Tue Aug 20, 2013 12:11 am
- Forum: s300 / SManager
- Topic: Lambda overlay is blank, will not display datalogged values.
- Replies: 2
- Views: 1906
Re: Lambda overlay is blank, will not display datalogged val
Double check your overlay options, I.E. minimum tps, speed, etc.
Post up the calibration.
Post up the calibration.
- Tue Aug 20, 2013 12:07 am
- Forum: s300 / SManager
- Topic: Low 10 second datalog
- Replies: 10
- Views: 3584
Re: Low 10 second datalog
Any updates? Curious how it turned out.
- Wed Jul 31, 2013 7:50 pm
- Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
- Topic: AEM wideband hookup into 2012si ecu??
- Replies: 8
- Views: 6214
Re: AEM wideband hookup into 2012si ecu??
When using the AEM wideband's output, don't forget to set the "Wideband Lambda" table (volts vs lambda), as the default values need to be modified. Also be sure the AEM sensor ground is grounded to ECU ground (vehicle specific). See the very last post in this thread regarding an example to...
- Wed Jul 31, 2013 7:41 pm
- Forum: s300 / SManager
- Topic: Low 10 second datalog
- Replies: 10
- Views: 3584
Re: Low 10 second datalog
9queSt, pm rec'd. Glad to help via email, but keep posting in this thread (or others) as to help other members. I rely on forums like no other; it helps the community grow, especially in a niche market such as this. I've subscribed to this thread!
Mike (JR)
Mike (JR)
- Tue Jul 30, 2013 11:50 pm
- Forum: s300 / SManager
- Topic: Low 10 second datalog
- Replies: 10
- Views: 3584
Re: Low 10 second datalog
Take my advice with a grain of salt based on your needs, as I do not frequent the drag strip often. Just going off a combination of theory, hondata help files, hondata forums, and personal experience tuning. That being said... The mac solenoid responds very fast, it's up to the rest of the system to...
- Mon Jul 29, 2013 11:19 pm
- Forum: s300 / SManager
- Topic: Low 10 second datalog
- Replies: 10
- Views: 3584
Re: Low 10 second datalog
Nice setup. While I cannot provide input on the launch & anti-lag, I can point out a couple observations. 1.) On the 1320 datalog, I noticed AFR's going full rich from timestamp 1:25 to 1:27. After looking at the fuel high cam table, It *appears* as if the tuner stopped after column 18 (27.6psi)...
- Mon Jul 29, 2013 10:35 pm
- Forum: K-Pro / KManager
- Topic: new to tunning
- Replies: 1
- Views: 1343
Re: new to tunning
Sounds like you have spent a good chunk of change on a nice setup. This is not the answer you were looking for, but I would highly recommend getting this on the dyno and spending a couple hundred with a reputable tuner. I have street tuned my own cars on s300 and Flashpro, both NA and boosted, and s...
- Mon Jul 29, 2013 10:18 pm
- Forum: S2000 2006-2009 Americas/Europe/Asia
- Topic: 06+ turbo, fuel upgrade options (flashpro/aem 06+ only pls)
- Replies: 11
- Views: 13280
Re: 06+ turbo, fuel upgrade options (flashpro/aem 06+ only p
Well, I'll answer my own thread as this really isn't the best place to ask such questions. The 06+ DBW s2000 has a return-less fuel system, which is the bottleneck of this setup since effective fuel pressure is dropped by every pound of opposing force placed upon the injector (boost). I've found two...
- Sun Jul 28, 2013 3:34 am
- Forum: S2000 2006-2009 Americas/Europe/Asia
- Topic: 6 tuning questions - AP2 S2k (o2 CEL, s.trim, etc)
- Replies: 14
- Views: 13681
Re: 6 tuning questions - AP2 S2k (o2 CEL, s.trim, etc)
I hate bringing threads back from the dead, but after a year I have finally eliminated the Wideband Voltage Offset. (plus 2600 views on this thread dictates this should help others in the future) Solution = RTFM... Read The F*ing Manual. (your wideband manual), and input the correct values in the la...
- Thu May 30, 2013 8:22 am
- Forum: S2000 2006-2009 Americas/Europe/Asia
- Topic: Closed loop operation with only wideband o2
- Replies: 2
- Views: 2742
Re: Closed loop operation with only wideband o2
Thanks.Hondata wrote:Closed loop will only work with the factory o2 sensor.
- Wed May 29, 2013 11:36 pm
- Forum: S2000 2006-2009 Americas/Europe/Asia
- Topic: Closed loop operation with only wideband o2
- Replies: 2
- Views: 2742
Closed loop operation with only wideband o2
As title states, simple question... Can closed loop operate with only a wideband o2 sensor? I remember seeing this option on s300/sManager, but I do not see this option in FlashPro Manager. (other than in Options: Settings: Lambda overlay options, which of course does not change the calibration) My ...
- Tue May 28, 2013 11:41 pm
- Forum: S2000 2006-2009 Americas/Europe/Asia
- Topic: 06+ turbo, fuel upgrade options (flashpro/aem 06+ only pls)
- Replies: 11
- Views: 13280
Re: 06+ turbo, fuel upgrade options (flashpro/aem 06+ only p
.fpcal attached
.fpdl attached
.fpdl attached