Hondata

I have tried Honda scan tool and have no issue with the OBD scanning

Hi Hondata, I wanted to ask what base mapping to start with for the following bolt ons: Hondata Intake Manifold Gasket Injen SRI Vibrant Headers w/High Flow Cat Vibrant Streetpower Gen2 Cat Back Exhaust I also have the P2R TB Spacer and gaskets but they are not on yet. I currently have a CEL light,...

Hi everyone, i got a 2010 FD Type R in Malaysia, i am getting the Flashpro tomorrow. my car basically running everything stock except the J's racing muffler, all i want to do now is just unlock the speed lock but I've been told by the Malaysia Hondata dealer the stock map doesn't suit us bcz the fu...

I upgraded to V1.1.4.7 and the Firmware that goes with it (17?). Serial is FP-S2K-US-30116 Now, every time I plug the FP into my computer - FP Manager automatically shuts off and disappears. If I try to open a calibration by double clicking on it while the FP unit is connected I get the following m...

Please check your email

Thanks

WUman wrote:Anyone has a Map for me?

Here are my modifications

Gruppe M Airbox
J'S Racing header
J'S Racing decat
Kakimoto Regu 06R cat back

Please let me know

Thanks

Greetings from germany

hi there

please contact me for the calibration.

Thanks

hello, i am from asia. i bought a complete SI head with a k24 block and an SI ecu for my FD2. i also bought a flashpro to tune it of course the engine was put perfectly PROBLEM i swapped the ecu of my car with the SI ECU the car did not work because of the immobilizer. as said by the people from 8t...

hello, i am from asia. i bought a complete SI head with a k24 block and an SI ecu for my FD2. i also bought a flashpro to tune it of course the engine was put perfectly PROBLEM i swapped the ecu of my car with the SI ECU the car did not work because of the immobilizer. as said by the people from 8t...

Hi Hondata

Do you intend to add in the 37820-RRH-U63 ECU Part number?

It is similar to the 37820-RRH-U11 ECU which having the same wiring, same emission and same engine.

Thanks

Just uncheck it in the Misc. section. The ECU will not have the circuitry to operate a relay. yeah i know it can be easily done by uncheck it in the MISC but can we also add another starter relay to it in mechanically? just would like to know can we do it in mechanical instead of software. thanks

Hi there

I am running on K20A engine, i don't have the Push Start Button in my vehicle, loaded the JDM FD2 Type R MAP and without untick the Starter Relay.

Just mechanically wise, is it possible to eliminate the CEL with just add on additional relay?

Thanks

Hi guys

Any one of you know other than untick the starter relay in the Flashpro Manager, is there any way we can add in another relay to the ECU or starter to disable the CEL?

Thanks

Hi Anyone knows how to write the ECU Part number code back to the ECU? Currently I have a ECU not listed in the Hondata FP supported ECU group, I would like to know is there any way to write the ECU Part Number to match the FP listed ECU? I think the FP is checking on the OBD Mode 09 for the ECU Par...

Hi

Can I use flashpro FP-SI-INT for US Civic Si outside of the states? Or the Civic Si must only use the FP-SI-US?

Thanks

Dawid S wrote:Hi.

I can not download Flashpro manager V1-1-0-9
http://www.hondata.com/updates/FlashPro ... -1-0-9.exe
Please advice

The V1.0.9 is Beta version

Now we already have V1.1.1

You can download here
http://www.hondata.com/updates/FlashPro ... V1-1-1.exe