Search found 312 matches

by Johnny_9
Fri Mar 28, 2014 12:35 am
Forum: s300 / SManager
Topic: SManager 2.3.2
Replies: 28
Views: 12776

Re: SManager 2.3.0

1) Does S300 V3 have an exportable datalog for Knock?

2) If exportable via DDE, can you provide guidance/links as to how this would be done?
by Johnny_9
Thu Feb 13, 2014 4:29 am
Forum: CR-Z 2010-2012 US/Europe/Asia
Topic: Hondata FlashPro for Asia CRZ - Manual Trasmission
Replies: 9
Views: 16581

Re: Hondata Flashpro for Asia CRZ

Question... All Asia CRZ comes with "Engine Auto Stop" and "Immobiliser" features, I know these are good for stock car since it comes with it. 1. Once my CRZ is supercharged, will this feature damage my supercharged engine since the charged engine temperature is higher than stoc...
by Johnny_9
Wed Feb 05, 2014 4:19 pm
Forum: s300 / SManager
Topic: Discussion: Adding more resolution to the maps or not?
Replies: 2
Views: 6669

Re: Discussion: Adding more resolution to the maps or not?

Worth a try.

Would there be an issue with data-logging/snake trails (& how it works on secondary maps)? May impact the user friendliness of the whole process.
by Johnny_9
Wed Feb 05, 2014 4:15 pm
Forum: s300 / SManager
Topic: TPS ignition parameters tab
Replies: 3
Views: 1926

Re: TPS ignition parameters tab

It's to compensate for timing belt flex, which advances the ignition, when you jab the gas.
by Johnny_9
Wed Nov 06, 2013 4:13 am
Forum: s300 / SManager
Topic: SManager V2.2.7 (beta)
Replies: 61
Views: 87481

Re: SManager V2.2.7 (beta)

9queSt wrote:
Spunkster wrote:It will be fixed in the next release in a week or two.
I have FWD nationals this coming weekend. I have been getting lean afr. It would be nice if the lean cut worked. I need that new verison
Hope there is an update soon...
by Johnny_9
Wed Oct 30, 2013 1:28 am
Forum: s300 / SManager
Topic: Low idle in high humidity weather?
Replies: 16
Views: 6591

Rusty Corroded Ground

If it only happens when humid then you may have a wiring or mechanical problem that is affected by getting wet. Yes. Rusty corroded ground? For your reference (Ref - http://www.interfire.org/res_file/92114-10.asp) Electrical current will flow through water or moisture only when that water or moistu...
by Johnny_9
Wed Aug 14, 2013 5:15 am
Forum: s300 / SManager
Topic: injectors cutting out at low throttle?
Replies: 3
Views: 1961

Re: injectors cutting out at low throttle?

Old Car = Check your electrical grounds - gearbox to chassis.
by Johnny_9
Mon Jul 29, 2013 6:23 am
Forum: s300 / SManager
Topic: IAT - Add Timing at Colder Temp
Replies: 4
Views: 3117

Re: IAT - Add Timing at Colder Temp

http://staff.um.edu.mt/mario.a.farrugia ... Manual.pdf - Page 68

20C

Also Corroborated from another print source
by Johnny_9
Sat Jul 13, 2013 5:04 am
Forum: s300 / SManager
Topic: SManager software requests
Replies: 336
Views: 1523010

Re: SManager software requests

Hondata wrote:You can do this now using DDE.
Can you suggest some resources/links, on how to write a DDE stream to a csv file?
by Johnny_9
Wed Jul 10, 2013 1:30 am
Forum: s300 / SManager
Topic: IAT - Add Timing at Colder Temp
Replies: 4
Views: 3117

Re: IAT - Add Timing at Colder Temp

IT is not possible with table despite what it says there to add timing when it is colder. The best thing to do would be to tune when it is cold and then you can use the retard to pull timing when it is hot. The software will probably be changed to have the proper wording in future releases. Thanks!...
by Johnny_9
Tue Jul 09, 2013 5:34 am
Forum: s300 / SManager
Topic: IAT - Add Timing at Colder Temp
Replies: 4
Views: 3117

IAT - Add Timing at Colder Temp

Is there a way to add timing at colder IAT's; the software wont allow that at 42 C (it only allows zero and no higher value) _________________________________________________________________________________ Is the OEM tune for temperate climates - tuned in colder weather and retarded for hot summers...
by Johnny_9
Sat Jun 15, 2013 9:16 pm
Forum: s300 / SManager
Topic: Problem w/ part throttle misfire. Help!!
Replies: 3
Views: 2265

Re: Problem w/ part throttle misfire. Help!!

The ignition timing between load columns is too big - e.g. @2,750rpm - 5 (31.25) and 6 (25.5). Look at the stock map for the spacing and overall shape. Remember play SAFE and RETARD first, unless you have means to detect knock; if not take it to your tuner. Analyse/graph the gradient of ignition cur...
by Johnny_9
Mon May 27, 2013 5:33 am
Forum: s300 / SManager
Topic: DDE
Replies: 0
Views: 5831

DDE

Any suggested resources, on how to write the DDE stream to a CSV file?
by Johnny_9
Tue May 21, 2013 6:23 am
Forum: s300 / SManager
Topic: SManager software requests
Replies: 336
Views: 1523010

Re: SManager software requests

Better Map compare functionality for fuel and ignition

http://www.hondata.com/forum/viewtopic.php?f=19&t=11928
by Johnny_9
Tue May 21, 2013 6:18 am
Forum: s300 / SManager
Topic: SManager software requests
Replies: 336
Views: 1523010

Re: SManager software requests

Trigger scope for Cam/Crank/TDC sensor