Search found 79 matches

by peasly23
Mon Oct 29, 2007 4:03 pm
Forum: s300 / SManager
Topic: Innovate LC-1 Wideband with s300
Replies: 45
Views: 41937

As far as I know, turning off the "Heater Ground" error in the Misc tab is what you need to do, rather than wiring in the resistor. I'm having a problem with my unit right now with a huge ground offset but it may be because I didn't hook my white wire to D22, I hooked it in with all the re...
by peasly23
Sat Oct 27, 2007 4:16 pm
Forum: s300 / SManager
Topic: Innovate LC-1 Wideband with s300
Replies: 45
Views: 41937

No you do not need the ELD.
by peasly23
Thu Oct 25, 2007 1:19 pm
Forum: s300 / SManager
Topic: S300 Suggestion
Replies: 7
Views: 3496

S300 Suggestion

Could you possibly add in somewhere the boolean value of "Closed-Loop" on/off. So that when we look at datalogs, we can see if we are in fact going into Open-Loop at the proper time?

Thanks.
by peasly23
Thu Oct 25, 2007 1:18 pm
Forum: s300 / SManager
Topic: Going Lean in Closed-Loop (S300 & LC1) - Resolved
Replies: 8
Views: 4855

I think I figured out the problem. After getting the datalogger that came with my LC1 FINALLY working, I found that there was a huge voltage offset problem of -.63V I have since fixed this and I think it is working much better now.
by peasly23
Thu Oct 25, 2007 12:53 pm
Forum: s300 / SManager
Topic: WB/NB voltages are off - Resolved
Replies: 7
Views: 3591

I think I finally figured out my problem. But before I tell you what I think it was, I just wanted to say that it's not very helpful to keep saying all the time " this is why we only recommend the PLX ." I know, I know, but not EVERYONE HAS the PLX. The concepts are the same, so a little b...
by peasly23
Wed Oct 24, 2007 6:11 pm
Forum: s300 / SManager
Topic: WB/NB voltages are off - Resolved
Replies: 7
Views: 3591

The only explanation I can figure, is that although I set the Narrowband signal to 1V = 14 AFR and 0V = 15.4 AFR, it's not actually outputting that. And if that's correct, what in the world would cause it to be wrong?
by peasly23
Wed Oct 24, 2007 5:56 pm
Forum: s300 / SManager
Topic: WB/NB voltages are off - Resolved
Replies: 7
Views: 3591

Let's put a specific example here so that I may more clearly understand what is going on. Using the datalog that is marked " 735pm Changed Strim to +-25pct " At EXACTLY 0:1:06.707s my AF ratio is 16.99 (Lean) and my O2 voltage is .14V (which, according to my voltages entered above, would b...
by peasly23
Wed Oct 24, 2007 5:26 pm
Forum: s300 / SManager
Topic: WB/NB voltages are off - Resolved
Replies: 7
Views: 3591

Ok, first I want to say thank you for looking at this for me I greatly appreciate it because this car is my baby and I don't want to ruin it. And second I want to say that I understand what you are saying. So here's where I'm confused... My Innovate inputs a narrowband signal to the ecu where the st...
by peasly23
Tue Oct 23, 2007 7:08 pm
Forum: s300 / SManager
Topic: WB/NB voltages are off - Resolved
Replies: 7
Views: 3591

WB/NB voltages are off - Resolved

I started with a Stock p28 basemap. I have a 95 Honda Civic (D16Z6) RC 750cc injectors Walbro 255 What is going on between 33 seconds and 1:15 in my first datalog? Look at S.Trim, AF, and O2 Voltage at idle. I have the S.Trim set at -25 and it seems as though it started maxing out during idle while ...
by peasly23
Tue Oct 23, 2007 3:01 pm
Forum: s300 / SManager
Topic: Altering the Fuel Compensation Tables
Replies: 2
Views: 1997

Ok great, but you failed to answer all of my questions, and question #2 I think was answered incorrectly. I'll rephrase it because it was probably confusing. I was talking about ENGINE temp there, not the temperature outside. 1) Can anyone give the definitive on the BEST way to go about altering the...
by peasly23
Tue Oct 23, 2007 2:50 pm
Forum: s300 / SManager
Topic: Absolute/Atmospheric - Maximum Map, Etc.
Replies: 7
Views: 3026

Awesome! Thanks.
by peasly23
Tue Oct 23, 2007 8:34 am
Forum: s300 / SManager
Topic: Absolute/Atmospheric - Maximum Map, Etc.
Replies: 7
Views: 3026

Are the vacuum unit values in the attached screenshot correct? Or should they be changed from positive to negative or vice versa?
by peasly23
Mon Oct 22, 2007 10:24 pm
Forum: s300 / SManager
Topic: Altering the Fuel Compensation Tables
Replies: 2
Views: 1997

Altering the Fuel Compensation Tables

Sorry for this being long. I've bolded and numbered the specific questions below to aid in answering. Just to let you know, the reason I am trying to alter the Fuel Compensation tables is because my car runs like utter crap when it's cold (pig rich) but runs AWESOME once it's warm because I tuned it...
by peasly23
Mon Oct 22, 2007 8:53 pm
Forum: s300 / SManager
Topic: Absolute/Atmospheric - Maximum Map, Etc.
Replies: 7
Views: 3026

Great! Thanks. Maybe this could be added to the help file?
by peasly23
Mon Oct 22, 2007 8:46 pm
Forum: s300 / SManager
Topic: Going Lean in Closed-Loop (S300 & LC1) - Resolved
Replies: 8
Views: 4855

Yeah, I retuned my low columns at closed-loop. Everything looks good now. I don't know if I want to put my S.Trim & L.Trim to such high values though, I mean, they are so close now, I'd hate to have the computer adjust them too far off. It's running good now though. The only thing is when the en...