Search found 60 matches

by shiroitenshi
Fri Jul 06, 2012 5:47 am
Forum: s300 / SManager
Topic: Smanager and Win7 64bit issues - FTDI strikes again!
Replies: 5
Views: 2901

Smanager and Win7 64bit issues - FTDI strikes again!

Getting this problem after I updated to 2.0.0 SManager Stop 0x000008E in usbport.sys Doing this does not help as it cannot remove the driver entirely. http://www.hondata.com/techre4ftdiupdate.html Updated to 2.1.1 results in different error Stop 0x000007E Works fine in XP, so it's likely a driver is...
by shiroitenshi
Wed Sep 24, 2008 10:59 am
Forum: s300 / SManager
Topic: Question about injector sizing in Hondata 1.3.8 & alpha-
Replies: 0
Views: 1390

Question about injector sizing in Hondata 1.3.8 & alpha-

Previously I was using Hondata 1.3.0 for maybe a year or so. Car ran fine, so I really didn't bother updating it till recently when I swapped to a B20B engine. One problem I encountered was, when I entered bigger injector than stock, the fuel tables do not change. Previously when I used 1.3.0, when ...
by shiroitenshi
Mon Aug 18, 2008 10:40 am
Forum: s300 / SManager
Topic: Did anyone scan the latest 1-3-8?
Replies: 3
Views: 2293

Thanks, I was ignorant of the news section, another USER error, it seems The new features are great, I've been running the 1-3-0 for a while now, and with the new display feature, I can actually view most of the gauges on a smaller screen. I datalog with an EEEpc 701, and that new feature really hel...
by shiroitenshi
Mon Aug 18, 2008 9:48 am
Forum: s300 / SManager
Topic: Did anyone scan the latest 1-3-8?
Replies: 3
Views: 2293

Did anyone scan the latest 1-3-8?

Been using hondata for a while now, it's a great product, never had a hiccup with it, bar a few USER errors. Anyway, finally got everything up and running a year ago (I think) and thinking of using the later version of 1-3-8 and see what new features it offers. Downloaded, and I got this... Twice. I...
by shiroitenshi
Mon Aug 18, 2008 9:33 am
Forum: s300 / SManager
Topic: Spark plugs
Replies: 92
Views: 151779

For me, plug ratings are dependent on setup. B20B with 11.8 comp, I used 7, but with slight knocking, but plugs weren't bluish, so swapped to 8, enabled me to run slightly higher timing, and a little more gain in torque. Each manufacturer's 7 and 8 ratings does not equate to similar heat range, so i...
by shiroitenshi
Mon Aug 18, 2008 9:25 am
Forum: s300 / SManager
Topic: S300 Wideband D10
Replies: 7
Views: 3997

Still running in the upper 15s I have patched D10 back. The motor is now running fine. Still in OPEN LOOP. I'm confused, all I wanted to do is log the AFR why did cutting D10 result in the car running rough? Sorry if this is obvious question but I feel it needs to be answered. Figuring possibly bec...
by shiroitenshi
Sun Nov 04, 2007 9:54 am
Forum: s300 / SManager
Topic: S300j Feature Request
Replies: 10
Views: 5408

1.3.0 is out, but no speed limiter? Ouch.. :(
by shiroitenshi
Thu Oct 25, 2007 12:23 am
Forum: s300 / SManager
Topic: Downloading program?
Replies: 1
Views: 1318

the bottom right corner should have the word 'online' to show you connected successfully, then go to menubar on top, " O nline" to 'download' the maps from the ECU. It's below the upload menu item. Or did you just got the unit, and there's no maps inside, because AFAIK you need to first up...
by shiroitenshi
Wed Oct 24, 2007 12:51 am
Forum: s300 / SManager
Topic: idle problems
Replies: 10
Views: 4862

I'm not exacly sure from your description of your problem, but that same symptom or having a cycling idle where it bogs and and then IACV compensates, can also occur if you have a valve seat leak. (it's a form of air leak, much like losing air from the manifold/vacuum sources.)
by shiroitenshi
Sun Oct 21, 2007 12:59 pm
Forum: s300 / SManager
Topic: S300j Feature Request
Replies: 10
Views: 5408

Re: S300j Feature Request

I too have already expressed an interest in having this feature even if its just a simple tire size or % correction that be useful The speed sensor signal goes from the sensor to both the dash and ECU. To change the signal the dash receives you'd need to change the speed sensor. was not this a opti...
by shiroitenshi
Sat Oct 20, 2007 12:09 pm
Forum: s300 / SManager
Topic: S300j Feature Request
Replies: 10
Views: 5408

Re: S300j Feature Request

I too have already expressed an interest in having this feature even if its just a simple tire size or % correction that be useful The speed sensor signal goes from the sensor to both the dash and ECU. To change the signal the dash receives you'd need to change the speed sensor. I see, so it's not ...
by shiroitenshi
Sat Oct 20, 2007 11:54 am
Forum: s300 / SManager
Topic: Anyone else tried to set the s300 wireless/cableless?
Replies: 11
Views: 7042

I have, but only with bluetooth, so distance is limited. And as fun as it was, it has no practical applications I can think of. In this case, I did it with a laptop with a bluetooth unit. I used a K750i phone as a remote commander, with a custom .hid profile so that the keys are mapped to the hotkey...
by shiroitenshi
Sat Sep 15, 2007 4:46 pm
Forum: s300 / SManager
Topic: Runnin Lean
Replies: 2
Views: 1802

At part throttle, you are running in closed loop unless you disabled the 02 sensor (which means running in open loop) If you tune in closed loop mode, you will notice that no matter what you do, the ECU will try to keep it stoich. So if you are having issues with adding fuel, but changes are not app...
by shiroitenshi
Sat Sep 15, 2007 8:15 am
Forum: s300 / SManager
Topic: S300j Feature Request
Replies: 10
Views: 5408

You can use the launch control feature as your speed limiter.. Just determine the maximum rpm you want to use in that gear, and set it up.. Set the MPH limit a lot higher, so that it won't disable the launch control.. Yes, I also realised this, but it's not gear specific, so if you are at higher ge...
by shiroitenshi
Fri Sep 14, 2007 8:17 pm
Forum: s300 / SManager
Topic: S300j Feature Request
Replies: 10
Views: 5408

S300j Feature Request

Well, I bought a S300J, got it setup and tuned, works great. However, I do wish for a few extra features that should not be too much of a burden for your SManager program developer. Hopefully you can introduce it on the next iteration of SManager programme. a) VSS speed correction, hopefully I can i...