Hondata

Datalog(display menu) with your laptop plugged and look at your ect sensor. It will tell you the actual heat of the coolant. Have you bleed the coolant system? Check your vaacum hoses see if there is any leaks.

Run the tsx basemap?

Okay. Thats awesome! Since it could idle and start no problem. No rush just lmk if you need anything.

And yeah my paypal is just zoua95@yahoo.com

You dont have too, i just hope it worked for you and give me feedback haha for more experience.

I never had someone paypal me so Is it just my email for paypal? If it is then its just zoua95@yahoo.com

Is it a nice stable idle? Lmk how DD and full throttle is.

I lower Vtec to 4000RPM since the you are bolt on and lower your Rev limit to 8500. I recommend you to have a wideband and adjust your full throttle to spec. If you have your o2 sensor on it will compensate and fix the lean or rich mixture during Daily portion. I dial in your injector it should be b...

Compression test. Add more fuel into cylinder 2 and see.

^like he says, deadtime matters!

Go to online-> tools-> download

Do this with the car on accessory or with the car running.

Are you tuning with an actual aftermarket wideband? Or just the oem wb02?

What oil areyou running? Alot of Force induction car i tuned, they switch over to thicker oil and the engine and engine bay runs cooler also.

Upload your current tunr that you are using to start up the car.

Did you dial in your injectors?

What brand injector

I would rather run the basemap off of kpro for the k20a3 they should be capable to drive DD i wouldnt smash on the car unless you have a wideband to make sure its safe. And pumping 93 to blend with the 89. You would want close to a 91 octane mix. Try to get a good full 91+ octane mix before taking i...

Try pumping 91 octane and octane booster to bump up the octane. Running 89 octane you will be knock limited

I advice having a wideband to adjust afr to spec. Give me feedback if there is any problem i will try to help with what i can.