Hondata

#not legible (pic attached)

Customer gave me his Kpro red board installed in a PNF-A13 ECU stating it won't start and has the D1 led flashing red.

I am going to try to connect, erase and reprogram but I wanted to see what this LED means. Tks.

Thanks again. You may close this thread.

That was it - thank you for the excellent customer support!

Question - Is this option checked by default? I'm assuming yes or the changes will never be stored?

#42149 I installed an ran 2.6.7.0 and after seeing the board go online... 1) I downloaded the .cal 2) The current .cal uses a 5 bar map sensor 3) I changed it to stock map sensor 4) I uploaded the change (real time update is also checked) 5) I downloaded the .cal again to see if the change to stock ...

2 observations:

1) I was able to change a letter in the Last Name of the registered owner and the change sticks
2) I installed the S300 board in another ECU and the issue persists.

S300 will not accept changes. Tried erasing which is successful but when I download from the S300 it comes back with the original parameters so I know it NOT being erased. Using Smanager v2.6.6.0

Thank you. You may closed this post.

I have a customer that called saying he has a JDM P30 and S300J and the ECU is bad. He wants to know if the S300J and be installed in a P28. I don't have an S300J so I can't test fitment...

Thnak you.

You can lock this post if you want.

Ok, can you explain what they are used for?

Ok - do you have the pinout for the external connector on the V1 board?

I have a customer who wants a bluetooth connection with his OBD1 ECU and S300v1 board. The bluetooth adapter connects via the CN2 port but obviously is being used by the S300. Is there a passthru connection to the CN2 port within the S300 board which I can tap to run the bluettoth adapter?

Email sent - thanks!

2.6.6.0