Hondata

Brother, can you please upload your calibration?

Thank You

My car is set at 50deg vtc on cam angle low, at about 5000rpm. then the cam angle high table is all 50deg until abt 6000rpm before dropping to 30+deg at 9000rpm The funny thing is my car only runs 50deg when its running the cam angle low table. when its running the cam angle high table, it only did...

My car is set at 50deg vtc on cam angle low, at about 5000rpm. then the cam angle high table is all 50deg until abt 6000rpm before dropping to 30+deg at 9000rpm The funny thing is my car only runs 50deg when its running the cam angle low table. when its running the cam angle high table, it only did ...

I had just installed the 4 bar map sensor on my k20 engine. Its automatic transmission. I've used flashpro and select the 4 bar map sensor function and flash it into my car. Now I am getting high RPM in between gear shifts. Example, wot, red line is at 6800, and rpm will drop to about 4000+ rpm afte...

Dear Romeo Chris, how is the situation right now ? Just to share. Ur problem might be the tune, not the FP manager issue. I bought my Hondata Flashpro from a guy named J**l in Singapore. He dyno tuned my car. from the sheet he showed me, my fd2 auto(non Type R) made 111hp, and after tuned was 113hp ...

how do i set up this display on my FP manager ?

Since Hondata had responsed, Everybody please stop panicking. But please get it fixed asap.

Also, for Asia Civic FD2 155hp (non type R). The cruise control cant work no matter what map i use. Please fix that as well.
Cheers

Same problem here, since updated to 1.5.0
Nothing happen when i press program and datalog button. Cant upload map nor datalog.

Whats going on ?

Thanks for your reply Hondata. Yes, i am getting very bad mileage per tank of petrol. I open up the lamda overrun settings. the values were way off from those values at the help section, and the map maximum was 500kpa! I believe the erratic idling is from the skunk2 dbw throttle body i am using. Whe...

Hi, Sorry. I've posted the right file this time. In this datalog, i had been driving on the road for a while to the "safe & long isolated road" before i hit datalog and test the car. when i open the file, the part when datalog just begun, the knock count was already 200+ counts. at the...

should i keep trying, datalog, and adjust the fuel value, until there's minimum knock or adjust individual cylinder fuel trim or individual cylinder ignition angle ?

fp-si-int-20856 flashpro manager version 1.2.8.0 Asia civic fd2.0 auto transmission oem honda ecu converted to civic si, complete si head, si 11.0:1 piston, maintaining auto transmission. skunk 2 dbw throttle body, k&n open pod filter, 2.5" catback exhaust, skunk 2 fuel rail, retain stock 2...

i datalog and on the road rev from 1000-6000 on gear 1 and gear 2. and made necessary fuel change as recommended. did this a couple of time. made changes a few times. the car did run smoother than before. but on datalog, it shows high level of knocking. cylinder 1 13 cylinder 2 153 cylinder 3 97 cyl...

bro, you can use flashpro, civic type R outside north america. Thats what i am using for my fd2 155hp auto transmmission. i used the civic si stock eq map to tune. I believe, if you are a tuner yourself, you wont ask me too many questions. the only thing you need to note is, -15% speed at dash. and ...

I dont have a copy of the calibration. I also dont try uploading any map on to my car or try to tune myself. I'm just trying to find a solution here and get my tuner to try. my set up is change the internal of head and fill it up with k20a2's head stuff. and k20a2's 11.0:1 piston, reusing my stock c...