Hondata

i was thinking of setting

launch limiter.........5800

anit lag.................5300
fuel..........100
igniion......-20

soft limiter............5750


If I use the soft limiter with anti lag, is it more harmful to the engine then just anti lag alone?

What is the purpose of soft limiter?

Im trying to control boost by gear.
It thinks im in 5th when Im in 4th.
Its a ls trans with a gsr final drive. No 5th gear

The gear comp is set up correctly. Why does it think im in 5th when in 4th.

If the engine is cut due to a leaner condition then allowed in safety protection. Is it indicated in the catalog under sensors or something??? Kinda like the rev limit is indicated.

is there any ideas to protect against a map sensor failure. i.e. if im in the middle of a drag race @ 7000rpm and 25psi. the map sensor fails (vacuum line or wire failure). Smanager now drastically decreases fuel and increases timing.

How can I protect against this?

I had the overlay set up to only work when above 0 psi. I changed that to -40psi and it works great now.

Thanks

I had the overlay set up to only work when above 0 psi. I changed that to -40psi and it works great now.

Thanks

sensor overlay works and reads correctly but when I selected >show estimated change in fuel to reach target. It doesn't show anything.

i didnt have overlay selected under the VIEW tab. it works now

does lambda sensor overlay only work in open loop?

sorry i was on my phone when i wrote that.

When I click options> settings and make adjustments to anything in there, it sometimes changes the tables under Parameters tab> closed loop advanced.

It usualy changes target lambada (ect) and (load).

In settings window in smanager to change auto tune, lambada overlay, analog 1, analog 2. As soon as i close the settings window some of the advanced closed loop settings change.

You need to enter the AFR value you want lean protection to come at. If you use E85 then you must use the value you want it to com eon with the E85. The value I want it to come on at is .82 lambada. This is an afr for (E85 of 7.9 to 1) or for (REGULAR fuel is 12 to 1). The Smanager only know the wi...

when you select the AF sensor in the display template, where does the ecu get the af reading from?

I have my wideband wired analog to b6. Also wired digital to the s300 digital source.

When using the lean protection. It asks for lambada for protection to switch on. The help file says to enter this as an afr.

Im using e85, with no ethanol analyzer. Do I enter the value as it would be for the regular fuel or e85?

From what I understand, hitting the rev limiter can be violent on the engine.

Does FTS limit the RPM the same way the Rev limiter does?