Search found 53 matches

by picnic_george
Fri Jul 06, 2007 3:46 pm
Forum: s300 / SManager
Topic: Uploading issue...
Replies: 7
Views: 3966

Appearantly there were 3 pins that needed to be fixed. I plug the ECU in and now I can download but it still won't let me upload. It says something along the lines of error try upload again. Any ideas guys? This is making me look very bad in front of the boss and he's the one that decides what progr...
by picnic_george
Fri Jul 06, 2007 9:53 am
Forum: s300 / SManager
Topic: Uploading issue...
Replies: 7
Views: 3966

I think it's in the ecu itself. I'm taking to the computer shop across the street to take a look at it. The troubleshooting section says that it was installed incorrectly(or happened during shipping I'm not gonna blame it on who I bought it from). :cry:
by picnic_george
Fri Jul 06, 2007 9:21 am
Forum: s300 / SManager
Topic: Uploading issue...
Replies: 7
Views: 3966

When I plug in the USB it knows that's happening. Bottom left of the screen says offline. If I turn the ignition on it switches to online makes the sound and thats really about it. I can't upload, download, or anything. ECU information comes up blank(not sure how important that is). Version 1.2.7.0
by picnic_george
Thu Jul 05, 2007 5:03 pm
Forum: s300 / SManager
Topic: Uploading issue...
Replies: 7
Views: 3966

Uploading issue...

I got an s300 for a customers car. When I plug it in there everything seems normal. Upload download information dtc all the stuff lights up when I turn the ignition on but when I push upload it does not do anything. Maybe I'm missing something. Throw some ideas at me if you guys know. BTW there is n...
by picnic_george
Thu Jun 21, 2007 11:42 am
Forum: Applications
Topic: S300 P28 into a 93 vx???
Replies: 2
Views: 2858

S300 P28 into a 93 vx???

From what I've read the only real difference is the 5 wire o2 sensor. Will this sensor work at all with a p28? Would it require something simple? Disable heater and/or set o2 values? Or no if ands or buts about it have to convert to a 4 wire? If there are any other differences this would be greatly ...
by picnic_george
Mon Oct 02, 2006 12:49 pm
Forum: s300 / SManager
Topic: Typical IAT JRSC??
Replies: 9
Views: 5073

Water/methanol..... Went from 230+ after 2 passes(on a 60* evening) and even higher if I'm hot lapping to a consistent 120-130* hot lapping on a 90* day.
by picnic_george
Wed May 31, 2006 6:02 pm
Forum: s300 / SManager
Topic: A little problem
Replies: 15
Views: 7840

It turns out that there was nothing wrong with my dist, 6a box or coil. I never hit more than 89%+- duty cycle but I'm guessing it hit a limiter or some safety thing???. I basically changed my injector size to 550 and cranked the fuel pressure up to 60 and it runs ok now. Had to do quite a bit of di...
by picnic_george
Wed May 31, 2006 3:40 pm
Forum: S300 Calibrations
Topic: B18Csupercharger 12 ohm 440 injectors
Replies: 8
Views: 30562

Is this the same map you use on the Jackson Racing s300?
by picnic_george
Fri May 26, 2006 9:54 am
Forum: s300 / SManager
Topic: A little problem
Replies: 15
Views: 7840

Thank you. I changed the distributor to one that I know for sure works and it was exactly the same. I'll let you guys know after I change out the ignition and coil.
by picnic_george
Thu May 25, 2006 10:55 pm
Forum: s300 / SManager
Topic: A little problem
Replies: 15
Views: 7840

Well if it matters I put into another car and it reved it to 7500 so that was a good sign. Of course there was no boost present. Not sure if boost cut is a possibility w/ the s300. I'm gonna try to swap out my msd box/coil this weekend and see if it does anything different.
by picnic_george
Wed May 24, 2006 10:54 am
Forum: s300 / SManager
Topic: A little problem
Replies: 15
Views: 7840

In all honesty I think I datalogged that run with the calibration off that link I posted. I have no vpac. Just the s300 that is it. It's like it's hitting a rev limiter. Under load or just in nuetral. Doesn't matter what map I use either. Seems to be consistent. I'm also going to look at my MSD but ...
by picnic_george
Tue May 23, 2006 11:57 pm
Forum: s300 / SManager
Topic: A little problem
Replies: 15
Views: 7840

Re: question

takashi wrote:Hi, picnic_george. Is this file works with JRSC with 440cc also?
Yeah you can use that. But I would only use it as a base and take your car to a tuner to make sure everything runs perfect. BUMP for the datalog and any help if it shows you guys something.
Thanks
by picnic_george
Tue May 23, 2006 11:55 pm
Forum: s300 / SManager
Topic: About Jackson racing Hondata MAP sensor spacer
Replies: 11
Views: 6691

I don't see a radar detector screwing anything up. As for your calibration. You really should take the car to a dyno and have it tuned to make sure it runs properly. A stock p72 calibration probably isn't the best one to use seeing as how a stock p72 has no boost maps on it.
by picnic_george
Tue May 23, 2006 9:12 pm
Forum: s300 / SManager
Topic: A little problem
Replies: 15
Views: 7840

Check it!
by picnic_george
Tue May 23, 2006 12:53 pm
Forum: s300 / SManager
Topic: A little problem
Replies: 15
Views: 7840

http://hondata.net/forum/viewtopic.php?t=4399
Try this one. Sorry don't have a datalog at the moment. It's in my laptop. I'll tell you guys it doesn't show anything out of the ordinary that's for sure. I'll try to post it later.