If you set it to 90C / 110km/h:
As long as the vehicle is below 110 km/h, the fan will turn on at 90C, then off when it drops below 90C.
If the vehicle is over 110 km/h, the fan will turn off.
Search found 641 matches
- Thu Apr 27, 2023 1:06 pm
- Forum: s300 / SManager
- Topic: Fan control, turn off??
- Replies: 3
- Views: 904
- Fri Apr 21, 2023 1:30 pm
- Forum: s300 / SManager
- Topic: New S300 User
- Replies: 1
- Views: 442
Re: New S300 User
Hello everyone. I recently picked up a B20 swapped 91 Integra from my friend and it came with S300 installed. Car should be lots of fun once I get it tuned and running correctly. A little about myself, I am a technician for Chevrolet, ASE Master certified and GM World Class so I know my way around ...
- Fri Apr 07, 2023 8:43 am
- Forum: s300 / SManager
- Topic: TPS not calibrating
- Replies: 10
- Views: 1496
Re: TPS not calibrating
Make sure the part of the throttle body that grabs the "ears" on the TPS are not bent. It sounds like the throttle body is not engaging with the TPS properly. Also, make sure there is no old gasket left behind. This would space the TPS out too far away from the part it engages with.
- Fri Apr 07, 2023 8:41 am
- Forum: s300 / SManager
- Topic: Car Wants To Start But Shows Distributor Error
- Replies: 5
- Views: 3920
- Wed Mar 29, 2023 7:20 am
- Forum: s300 / SManager
- Topic: New to Hondas and need help
- Replies: 4
- Views: 945
Re: New to Hondas and need help
Take a datalog of the issue, then post it along with the calibration file you posted above.
- Tue Mar 28, 2023 8:27 am
- Forum: s300 / SManager
- Topic: MAP sensor reading funky.
- Replies: 11
- Views: 844
Re: MAP sensor reading funky.
Personally, I would just buy a brand-name MAP sensor with known scaling.
- Wed Mar 22, 2023 7:05 am
- Forum: s300 / SManager
- Topic: Will Not Rev Over 2500 RPM.
- Replies: 8
- Views: 1536
Re: Will Not Rev Over 2500 RPM.
I have noticed that my car will occasionally bug out when uploading a tune. This can be frustrating when in the staging lanes at the track, but here's the best solution I've found to correct the issue. Start with the USB cable unplugged from the laptop. Turn the ignition to the on position. Plug the...
- Wed Mar 22, 2023 6:59 am
- Forum: s300 / SManager
- Topic: New to Hondas and need help
- Replies: 4
- Views: 945
Re: New to Hondas and need help
I agree with Spunkster - a dyno tuning session after the head swap would be ideal. You need to confirm that you have an actual wideband sensor and that the previous owner didn't just install an AFR gauge hooked up to the stock narrowband sensor. Can you post your calibration file and a datalog showi...
- Wed Mar 22, 2023 6:51 am
- Forum: s300 / SManager
- Topic: Injectors too big?
- Replies: 2
- Views: 843
Re: Injectors too big?
Which 1000cc injectors are you using? If they are Lucas/Rochester style, I highly recommend upgrading to a name brand EV14/Bosch style injector. They behave MUCH better at idle.
- Fri Feb 03, 2023 1:50 pm
- Forum: s300 / SManager
- Topic: Dim check engine light
- Replies: 14
- Views: 1607
Re: Dim check engine light
Excellent news. Thanks for sharing the solution and closing the loop.
- Mon Nov 14, 2022 12:07 pm
- Forum: s300 / SManager
- Topic: analog inputs
- Replies: 2
- Views: 375
Re: analog inputs
I can help with fuel and oil pressure, as I am logging these through analog inputs. I'm using a 0-150 psi sensor for each, and they list the scaling at 0.5V = 0 psi (0 bar) and 4.5V = 150 psi (10.34 bar). For oil pressure, as an example: Input: Analog 1 Name: Oil Pressure Conversion: Custom Type: Pr...
- Mon Nov 14, 2022 11:48 am
- Forum: s300 / SManager
- Topic: Spark plugs
- Replies: 92
- Views: 151850
- Sun Nov 13, 2022 8:47 am
- Forum: s300 / SManager
- Topic: Spark plugs
- Replies: 92
- Views: 151850
Re: Spark plugs
If you start breaking up as boost comes up, you can try tightening your gap, as it may be blowing out the spark.
- Wed Nov 09, 2022 5:06 am
- Forum: s300 / SManager
- Topic: Spark plugs
- Replies: 92
- Views: 151850
Re: Spark plugs
Yep with all the research i did, it seems these plugs are the plugs to go to . I'm wondering what gap will be fine. I wrote down all the gaps and i believe they are at .031 thousandths and i think I'm going to start at .025 clearance and see how it's looking. That's a decent starting point. I have ...
- Fri Nov 04, 2022 4:23 am
- Forum: s300 / SManager
- Topic: Spark plugs
- Replies: 92
- Views: 151850